BDI21 Bass Amp Modeler/DI

BOD400 Bass Overdrive

The Behringer BOD400 Bass Overdrive pedal is designed to provide rich, tube- like distortion, smooth sustain, and a super-fat tone. It supports the entire frequency range of bass guitars, including 5 and 6-string models. The pedal features a BALANCE control to mix the overdriven signal with the natural bass sound for clarity and punch. It also includes a 2-band EQ, Gain, and Level controls, as well as a Balance control to blend in the right amount of clean tone while keeping the fundamental clear and providing maximum punch. The pedal operates on a 9V DC power supply or a 9V battery. The dimensions of the pedal are 70mm width, 123mm length, and 54mm height, with a weight of 0.33 kg.

BLE100 Bass Limiter Enhancer

CO600 Chorus Orchestra

The Behringer CO600 Chorus Orchestra is an ultimate stereo chorus effects pedal designed to suit various music styles. Here are the technical specifications and features: \- Controls: LEVEL, RATE, HIGH, LOW, DEPTH, ON/BATT LED, footswitch \- Connectors: 1/4" TS IN, 1/4" TS OUT A, 1/4" TS OUT B, DC IN \- Power Supply: 9 V battery or Behringer PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs) \- Impedance: 500 kΩ (In), 1 kΩ (Out A, Out B) \- Warranty: 3-Year Warranty Program The CO600 offers a warm vintage chorus, super-thick stereo effects, and a shifting detuned signal to create an orchestral stereo chorus effect. It also features a 2-band EQ, dedicated Depth, Rate, and Level controls for sound shaping, and a status LED for effect on/off and battery check. The pedal can be powered by a 9 V battery or the Behringer PSU-SB DC power supply. Additionally, it includes safety instructions and compliance information.

Rotary Machine RM600

The Behringer Rotary Machine RM600 is an effects pedal that delivers a wide range of 3-dimensional rotary speaker effects. It allows users to experience the classic and swirling sounds of famous signature rotary speakers in one compact pedal. The pedal features the following controls: 1\. FAST control: Adjusts the rotating speed of the drum and the horn when FAST mode is activated. 2\. SLOW control: Adjusts the rotating speed of the drum and the horn when SLOW mode is activated. 3\. DRIVE control: Adjusts the amount of tube-like overdrive. 4\. BLEND control: Adjusts the balance between the horn and the drum speaker. 5\. RAMP switch: Controls the time it takes to go from fast to slow rotary speed and vice versa. 6\. MODEL switch: Selects between 3 famous signature rotary speakers (145, L16, and 122). 7\. ON/BATT LED: Illuminates when active, indicating the modulation speed. 8\. Footswitch: Activates/deactivates the effect and allows switching between fast and slow modulation modes. 9\. IN A and IN B connectors: Used to plug in the instrument cables. 10\. OUT A and OUT B connectors: Send the signal to the amp, allowing for full stereo rotary effect. The pedal operates on a 9V power supply or a 9V battery and has the following technical specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Consumption: 60 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

UC200 Ultra Chorus

The Behringer UC200 Ultra Chorus pedal is designed to deliver a super-thick chorus with an unbelievable stereo effect. It offers full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal, creating a pleasant detune effect in connection with pitch variation. The pedal features the following controls: 1\. LEVEL: Adjusts the output level 2\. TONE: Allows adjustment of the overall effects sound to achieve a more defined and brilliant tone 3\. RATE: Determines the chorus effect speed 4\. DEPTH: Adjusts to achieve a fuller, deeper effect sound The UC200 also includes an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator. The footswitch is used to activate/deactivate the effect. The pedal has one ¼" TS IN connector for the instrument cable and two ¼" TS connectors OUT A and OUT B to send the signal to the amp. For mono use, only the OUT A connector is needed, while both connectors are used for a full stereo chorus effect. The power supply for the UC200 is a 9V, 100 mA regulated Behringer PSU-SB. The pedal can also be powered by a 9V battery. The physical dimensions are approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), and it weighs approximately 0.73 lbs / 0.33 kg. The UC200 is designed to comply with FCC rules and has been tested to provide reasonable protection against harmful interference in a residential installation. It also complies with EU directives and regulations.

UV300 Ultra Vibrato

The Behringer UV300 Ultra Vibrato is a high-quality effects pedal designed to deliver classic pitch modulation and dimensional vibrato effects from the '60s and '70s. The pedal features comprehensive controls that allow users to tailor the performance to their specific needs. Here are the technical specifications and features of the UV300 Ultra Vibrato: Controls: 1\. MODE switch: Changes the functionality of the effects pedal footswitch. It can be set to LATCH, UNLATCH, or BYPASS mode. 2\. RISE control: Adjusts the time needed for the effect to reach its maximum detuning. 3\. RATE control: Determines the speed of the vibrato effect. 4\. DEPTH control: Adjusts the intensity of the pitch modulation effect. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. 1/4" TS IN connector: Used to plug in the instrument cable. 8\. 1/4" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Used to plug in a 9V power supply (not included). 10\. BATTERY COMPARTMENT: Located underneath the pedal cover for installing or replacing the 9V battery (not included). Technical Specifications: \- In Connector: 1/4" TS \- Impedance: 500 kΩ \- Out Connector: 1/4" TS \- Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The UV300 Ultra Vibrato pedal does not have an on/off switch. It is activated as soon as the plug is inserted into the IN connector. The SERIAL NUMBER is located at the underside of the pedal. The UV300 is part of the MUSIC Group, and all trademarks are the property of their respective owners.

DC9 Compressor

The Behringer DC9 Dynamics Compressor is a guitar effects pedal designed to provide stable dynamics and sustain to the guitar signal without degrading the original sound. It can also boost the overall volume of the instrument for solo parts. The compressor limits the dynamic range of the signal by attenuating signal peaks exceeding a certain threshold level, resulting in a more powerful and punchy tone. Key Features and Controls: 1\. Sensitivity Control: Determines the compression ratio, intensifying compression as the sensitivity value increases. 2\. Output Control: Adjusts the output level to compensate for gain reduction or boost the instrument's output level. 3\. LED Indicator: Illuminates when the effect is activated and serves as a battery level indicator. 4\. Footswitch: Depress to activate/deactivate the effect. 5\. Input and Output Connectors: 1/4" TS connectors for instrument and amp connections. 6\. Power Supply: 9V power supply or 9V battery (not included). Technical Specifications: \- Input Impedance: 1 MΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 9 mA \- Dimensions: Approximately 56 x 113 x 69 mm (H x W x D) \- Weight: Approximately 0.24 kg (0.53 lbs) Safety Instructions: \- Do not use near water or heat sources. \- Use only authorized attachments/accessories. \- Do not attempt to service the product yourself.

CS400 Compressor/Sustainer

The Behringer CS400 Compressor/Sustainer pedal is designed to provide super- smooth compression and endless sustain for electric guitars. It competes head- to-head with leading products in the market and offers the following technical specifications and features: \- Pedal Type: Compressor/Sustain \- Analog/Digital: Analog \- Inputs: 1 x 1/4" \- Outputs: 1 x 1/4" \- Power Source: 9V DC power supply required \- Controls: Level control, Tone, Attack, and Sustain \- Dimensions: 2.125 × 2.75 × 4.8 inches \- Power supply: 9 V, 100 mA regulated \- Output impedance: 1 kΩ The CS400 is specifically designed to achieve super-smooth compression and endless sustain, enhancing the dynamic range of the guitar. It features dedicated controls for Sustain, Level, and Attack time, allowing for precise adjustments to achieve the desired sound. The pedal is suitable for a wide range of playing styles and provides consistent volume and ultra-stable dynamics.

SM200 Slow Motion

DC9 Dynamics Compressor

The Behringer DC9 Dynamics Compressor is a compact guitar effects pedal designed to provide stable dynamics and endless sustain to your guitar by evening out the signal without degrading the original sound. It can also be used to boost the overall volume of your instrument for solo parts. The compressor limits the dynamic range of a signal by attenuating signal peaks exceeding a certain threshold level, with the amount of gain reduction determined by the compression ratio. The result of compression is an attenuation of the difference between the loudest and softest playing, achieving a more powerful and punchy tone. Key features and controls include: 1\. Sensitivity control: Determines the compression ratio, intensifying compression as the sensitivity value is increased. 2\. Output control: Adjusts the output level to compensate for gain reduction resulting from compression or to boost the instrument's output level. 3\. LED indicator: Illuminates when the effect is activated and serves as a battery level indicator. 4\. Footswitch: Depress to activate/deactivate the effect. 5\. Input and output connectors: 1/4" TS connectors for instrument cable and amp connection. 6\. Power supply: 9V power supply (not included) or 9V battery. Technical specifications: \- Input impedance: 1 MΩ \- Output impedance: 1 kΩ \- Power supply: 9V, 100 mA regulated \- Power consumption: 9 mA \- Dimensions: Approximately 2 1/5 x 4 2/5 x 2 2/3" (H x W x D) \- Weight: Approximately 0.53 lbs / 0.24 kg

BLE100 Bass Limiter Enhancer

CL9 Compressor/Limiter

The Behringer CL9 Compressor/Limiter is designed to achieve super-smooth compression and extended sustain. It features the following technical specifications: Controls: 1\. ATTACK TIME control: Determines the speed at which the compressor responds to input signal peaks. 2\. LEVEL control: Adjusts the output level. 3\. SUSTAIN control: Determines the amount of compression. 4\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 5\. Footswitch: Used to activate/deactivate the effect. 6\. 1/4" TS IN connector: For instrument cable input. 7\. 1/4" TS OUT connector: Sends the signal to the amplifier. 8\. DC IN connection: For a 9V power supply (not included). 9\. Battery compartment: Located underneath the pedal cover. Specifications: \- Input Connector: 1/4" TS, Impedance 500 kΩ \- Output Connector: 1/4" TS, Impedance 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Physical Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), weight approx. 0.73 lbs / 0.33 kg The CL9 is designed to compress loud signals and boost low signals without degrading the original sound. It does not have an on/off switch and is powered by a 9V battery or a 9V power supply. The specifications and appearance are subject to change without notice.

SM200 Slow Motion

FCB1010

The Behringer FCB1010 is a versatile MIDI foot controller designed to provide extensive control over MIDI instruments and gear. It features 10 banks of presets, each with 10 fully user-editable presets, offering a total of 100 assignable control pedals. Additionally, the FCB1010 is equipped with two expression pedals that are completely assignable for every patch, providing flexibility and control over hardware workflow. The controller also includes two jacks for analog switching and is built ruggedly to withstand the demands of live performances.

VD400 Vintage Delay

The Behringer VD400 Vintage Delay pedal is designed to deliver authentic delay sounds comparable to state-of-the-art studio processors. It offers up to 300 ms of true analog delay and vintage slap-back echo. The pedal features the following controls: 1\. REPEAT RATE: Adjusts the delay time (repetition rate). 2\. ECHO: Adjusts the effect output level. 3\. INTENSITY: Adjusts the number of repetitions. Other features include a status LED for effect on/off and battery check, dedicated intensity, echo, and repeat rate controls for sound shaping, and a first-class electronic on/off switch for the highest signal integrity in bypass mode. The technical specifications of the VD400 Vintage Delay pedal are as follows: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V battery or BEHRINGER PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The pedal is designed and engineered in Germany and comes with a 3-Year Warranty Program.

DD400 Digital Delay

The Behringer DD400 Digital Delay is designed to deliver 24-bit high- resolution stereo delay sounds comparable to state-of-the-art studio processors. It features 7 different modes and a delay time of up to 1.3 seconds. The pedal includes dedicated Mode, Time, Feedback, and Level controls for versatile sound manipulation. The output impedance is 1 kOhm for each output, and it can be powered with a 9 VDC, 100 mA power supply.

DR600 Digital Reverb

The Behringer DR600 Digital Reverb is a digital stereo reverb effects pedal designed to deliver 24-bit high-resolution stereo reverbs comparable to state- of-the-art studio processors. It offers six different reverb sounds: Spring, Plate, Hall, Gate, Room, and Modulate. The pedal features controls for LEVEL, TONE, TIME, and MODE, allowing users to shape their overall sound and determine the reverb time. The pedal also includes dual output jacks for stereo enhancement. The technical specifications of the DR600 are as follows: \- Inputs: Two 1/4" TS connectors (IN A and IN B) for stereo input signal, or mono input by using IN A only \- Outputs: Two 1/4" TS connectors (OUT A and OUT B) for sending the signal to the amplifier, with the option for full stereo effect or mono output using OUT A only \- Power Supply: 9V DC power supply or 9V battery \- Power Consumption: 30mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The DR600 does not have an on/off switch and begins running as soon as the jack is inserted into the IN connector. The pedal also features an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator.

TM300 Tube Amp Modeler

The Behringer TM300 Tube Amp Modeler features authentic modeling technology for 3 classic guitar amps, 3 gain modes, and 3 mic placements, providing a total of 27 configurations to achieve sought-after tube amp sounds from clean to super-fat distortion. The pedal includes controls for LEVEL, LOW (boost/cut low-frequency range), HIGH (boost/cut high-frequency range), DRIVE (adjusts overdrive effect), MIC switch (simulates microphone placement), MODE switch (dial up one of 3 gain settings), and AMP switch (select one of 3 classic tube amps). The pedal also features an ON/BATT LED, footswitch, 1/4" TS IN and OUT connectors, DC IN connection for power supply, and a battery compartment. Technical specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9 V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs) The TM300 is designed to provide a wide range of tube amp sounds and offers flexibility in shaping tones for guitarists.

VP1 Vintage Phaser

The Behringer VP1 Vintage Phaser is a high-quality effect pedal designed to provide authentic and classic three-dimensional phase shifting, ranging from rapid rotary speaker to impressive jet plane effects. The pedal features the following controls and connectors: 1\. RATE control: Determines the speed of the phase shifting effect. 2\. TONE switch: Allows selection between negative feedback (lower position) or positive feedback (upper position) phaser modes. 3\. STATUS LED: Illuminates when the effect is activated. 4\. Footswitch: Activates/deactivates the effect. 5\. ¼" TS INPUT connector: Used to plug in the instrument cable. 6\. ¼" TS OUTPUT connector: Sends the signal to the amplifier. 7\. DC IN connection: Used to plug in a 9V power supply (not included). 8\. BATTERY COMPARTMENT: Located on the bottom for installing or replacing the 9V battery. Technical Specifications: \- Input Impedance: 100 kΩ \- Output Impedance: 15 kΩ \- Power Supply: 9V, 100 mA DC regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2.9 x 3.3 x 5.6" (H x W x D) \- Weight: Approximately 0.86 lbs / 0.39 kg The VP1 does not have an on/off switch and begins running as soon as the jack is inserted into the in connector. When not in use, it is recommended to remove the jack from the in connector to extend the battery life.

FD300 Ultra Feedback/Distortion

The Behringer FD300 Ultra Feedback/Distortion pedal is designed to produce endless feedback and sustain at any volume by simply pressing down the pedal. It also features an additional distortion circuit that provides super-thick and hard distortion with great dynamic response. Here are the technical specifications and features: Controls: 1\. LEVEL control: Adjusts the output level. 2\. TONE control: Shapes the overall sound. 3\. DISTORTION control: Adjusts the intensity of the distortion effect. 4\. OVERTONE control: Adjusts the amount of overtones causing feedback. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the distortion effect and adds feedback/sustain to the signal as long as the pedal is pressed. Connectors: \- 1/4" TS IN connector: Plugs in the instrument cable. \- 1/4" TS OUT connector: Sends the signal to the amp. \- DC IN connection: Plugs in a 9V power supply (not included). Power Specifications: \- Power Supply: 9V, 100mA regulated \- Power Consumption: 30mA \- Battery: 9V type 6LR61 Physical/Weight: \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg Safety Instructions: \- Do not use near water or install near heat sources. \- Use only authorized attachments/accessories. \- Do not service the product yourself; contact qualified servicing personnel for repairs. The FD300 has no on/off switch. As soon as the plug is inserted into the IN connector, the pedal is activated. When not in use, removing the plug from the IN connector extends the life of the battery.

VD400 Vintage Delay

The Behringer VD400 Vintage Delay pedal is designed to deliver authentic delay sounds comparable to state-of-the-art studio processors. It offers up to 300 ms of true analog delay and vintage slap-back echo. The pedal features the following controls: 1\. REPEAT RATE: Adjusts the delay time (repetition rate). 2\. ECHO: Adjusts the effect output level. 3\. INTENSITY: Adjusts the number of repetitions. Other features include a status LED for effect on/off and battery check, dedicated intensity, echo, and repeat rate controls for sound shaping, and a first-class electronic on/off switch for the highest signal integrity in bypass mode. The technical specifications of the VD400 Vintage Delay pedal are as follows: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V battery or BEHRINGER PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The pedal is designed and engineered in Germany and comes with a 3-Year Warranty Program.

HD300 Heavy Distortion

The Behringer HD300 Heavy Distortion pedal is designed to deliver a powerful dual-distortion effect with a massive gain boost for superthick, heavy low-end punch and endless sustain. It provides loads of outrageous distortion and allows users to crank up the bottom-end and gain for the ultimate heavy metal barrage. The pedal features dedicated controls for Gain Boost, Distortion, Tone, Bottom, and Level, enabling users to dial in a trademark sound. The status LED indicates when the pedal is activated, and the rock-solid on/off switch maintains outstanding signal integrity in bypass mode. The HD300 can be powered with a 9V battery or the PSU-SB DC power supply (not included).

OD300 Overdrive/Distortion

The Behringer OD300 Overdrive/Distortion is a 2-mode effects pedal designed for electric guitars. It offers the ability to create state-of-the-art overdrive, distortion, or a combination of both effects. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TONE: Shapes the overall sound. 3\. DRIVE: Adjusts the intensity of the overdrive/distortion effect. 4\. MODE: Balances between overdrive and distortion effects, with the leftmost position providing pure overdrive and the rightmost position providing pure distortion. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. ¼" TS IN connector: Input for the instrument cable. 8\. ¼" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Input for a 9V power supply (not included). 10\. Battery compartment: Located underneath the pedal cover for 9V battery installation or replacement. The OD300 has no on/off switch and begins running as soon as the jack is inserted into the IN connector. When not in use, removing the jack from the IN connector extends the battery life. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

UC200 Ultra Chorus

The Behringer UC200 Ultra Chorus pedal is designed to deliver a super-thick chorus with an unbelievable stereo effect. It offers full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal, creating a pleasant detune effect in connection with pitch variation. The pedal features the following controls: 1\. LEVEL: Adjusts the output level 2\. TONE: Allows adjustment of the overall effects sound to achieve a more defined and brilliant tone 3\. RATE: Determines the chorus effect speed 4\. DEPTH: Adjusts to achieve a fuller, deeper effect sound The UC200 also includes an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator. The footswitch is used to activate/deactivate the effect. The pedal has one ¼" TS IN connector for the instrument cable and two ¼" TS connectors OUT A and OUT B to send the signal to the amp. For mono use, only the OUT A connector is needed, while both connectors are used for a full stereo chorus effect. The power supply for the UC200 is a 9V, 100 mA regulated Behringer PSU-SB. The pedal can also be powered by a 9V battery. The physical dimensions are approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), and it weighs approximately 0.73 lbs / 0.33 kg. The UC200 is designed to comply with FCC rules and has been tested to provide reasonable protection against harmful interference in a residential installation. It also complies with EU directives and regulations.

SF300 Super Fuzz

The Behringer SF300 Super Fuzz is a 3-mode fuzz distortion effects pedal designed for electric guitars, recreating a variety of famous fuzz tones from the '60s and '70s. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TREBLE: Allows boosting/cutting of the high-frequency range. 3\. BASS: Allows boosting/cutting of the low-frequency range. 4\. GAIN: Adjusts the gain for more distorted sounds. 5\. MODE switch: Selects between 3 effect modes: \- FUZZ 1: Basic fuzz sound with emphasis on the midrange. \- FUZZ 2: Full-bodied fuzz sound with scooped mids and sharp harmonics. \- BOOST: The Level control is inactive, and the Gain control adjusts the boost. Additional features include an ON/BATT LED that serves as a battery level indicator, a footswitch for activating/deactivating the effect, 1/4" TS IN and OUT connectors for instrument and amp connections, and a DC IN connection for a 9V power supply (not included). The pedal can also be powered by a 9V battery. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), or 54 x 70 x 123 mm \- Weight: Approximately 0.73 lbs / 0.33 kg

VT999 Vintage Tube Monster

The Behringer VT999 Vintage Tube Monster is a classic vacuum tube overdrive pedal designed to deliver a full-tone roar of a tube engine. Here are the technical specifications and features: 1\. Controls: \- 9V power supply connection \- Power switch for activation/deactivation \- Power LED indicator \- 1/4" TS OUT connector for sending the signal to the amp \- 1/4" TS IN connector for instrument cable \- THRESHOLD control for adjusting input signal level \- Integrated noise gate switch for noise reduction \- GAIN control for adjusting distortion level \- TREBLE control for boosting/cutting high-frequency range \- MID control for boosting/cutting mid-frequency range \- BASS control for boosting/cutting low-frequency range \- MASTER control for adjusting output level \- BUGERA 12AX7B vacuum tube placement \- Footswitch for effect activation/deactivation \- DRIVE LED indicator for effect activation 2\. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 510 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 300 mA adaptor (included) \- Power Consumption: 250 mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg 3\. Additional Features: \- Hand-selected 12AX7 vacuum tube for warm sound \- Integrated and switchable noise gate with adjustable threshold \- Onboard 3-band EQ for tone shaping \- Dedicated Gain and Master output level control \- True-bypass wiring for maintaining tone integrity \- Dedicated power supply included

BOD400 Bass Overdrive

The Behringer BOD400 Bass Overdrive pedal is designed to provide rich, tube- like distortion, smooth sustain, and a super-fat tone. It supports the entire frequency range of bass guitars, including 5 and 6-string models. The pedal features a BALANCE control to mix the overdriven signal with the natural bass sound for clarity and punch. It also includes a 2-band EQ, Gain, and Level controls, as well as a Balance control to blend in the right amount of clean tone while keeping the fundamental clear and providing maximum punch. The pedal operates on a 9V DC power supply or a 9V battery. The dimensions of the pedal are 70mm width, 123mm length, and 54mm height, with a weight of 0.33 kg.

EQ700 Graphic Equalizer

The Behringer EQ700 is an ultimate 7-band graphic equalizer designed to shape your sound and eliminate feedback. It offers 15 dB of available boost or cut per band, allowing for precise control over the audio spectrum from below 100 Hz to over 6.4 kHz. The EQ700's seven frequency bands have been carefully optimized to provide the ultimate tools for EQ’ing your guitar, with special attention paid to the critical midrange frequencies. The EQ700 allows users to effectively cut or boost a slew of frequencies to help bring focus to their sound. It is particularly useful for sculpting the perfect guitar sound, with the ability to add warmth and body by boosting frequencies around 200 Hz - 400 Hz, and clarity to clean guitar signals by boosting frequencies in the 3.2 kHz - 6.4 kHz range. Additionally, it provides tips for applying EQ to the guitar, emphasizing the importance of understanding the frequency range of the instrument. The pedal is designed for use with guitar and keyboard and has been carefully engineered to compete head to head with leading products in the market.

UV300 Ultra Vibrato

The Behringer UV300 Ultra Vibrato is a high-quality effects pedal designed to deliver classic pitch modulation and dimensional vibrato effects from the '60s and '70s. The pedal features comprehensive controls that allow users to tailor the performance to their specific needs. Here are the technical specifications and features of the UV300 Ultra Vibrato: Controls: 1\. MODE switch: Changes the functionality of the effects pedal footswitch. It can be set to LATCH, UNLATCH, or BYPASS mode. 2\. RISE control: Adjusts the time needed for the effect to reach its maximum detuning. 3\. RATE control: Determines the speed of the vibrato effect. 4\. DEPTH control: Adjusts the intensity of the pitch modulation effect. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. 1/4" TS IN connector: Used to plug in the instrument cable. 8\. 1/4" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Used to plug in a 9V power supply (not included). 10\. BATTERY COMPARTMENT: Located underneath the pedal cover for installing or replacing the 9V battery (not included). Technical Specifications: \- In Connector: 1/4" TS \- Impedance: 500 kΩ \- Out Connector: 1/4" TS \- Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The UV300 Ultra Vibrato pedal does not have an on/off switch. It is activated as soon as the plug is inserted into the IN connector. The SERIAL NUMBER is located at the underside of the pedal. The UV300 is part of the MUSIC Group, and all trademarks are the property of their respective owners.

UM300 Ultra Metal

The Behringer UM300 Ultra Metal is a high-quality effects pedal designed to produce extreme hard rock and heavy metal distortion sounds. It features a dual-gain circuitry that enables the production of super thick, tube-like distortion and endless sustain. The pedal includes the following controls: 1\. LOW control for boosting/cutting the low-frequency range 2\. Two MID FREQ controls for boosting/cutting a defined mid-frequency range, with the upper control adjusting the mid range and the lower control adjusting the center frequency 3\. LEVEL control for adjusting the output level 4\. ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator 5\. Footswitch for activating/deactivating the effect 6\. ¼" TS IN connector for plugging in the instrument cable 7\. ¼" TS OUT connector for sending the signal to the amp 8\. DC IN connection for plugging in a 9V power supply (not included) 9\. Battery compartment located underneath the pedal cover The UM300 does not have an on/off switch. It begins running as soon as the jack is inserted into the IN connector. The pedal's dimensions are approximately 54 x 70 x 123 mm (H x W x D), and it weighs approximately 0.33 kg (0.7 lbs). The power supply requirements include a 9V battery or a 9VDC power supply.

XD300 Distortion-X

The Behringer XD300 Distortion-X is a high-quality effects pedal designed to produce super thick, tube-like distortion and endless sustain. It features the following controls: 1\. LEVEL: Adjusts the output level. 2\. CONTOUR: Modifies the tone of the signal from traditional to super-modern sounds. 3\. PUNCH: Adds aggressive mid-frequency punch to the signal for more distinctive distortion sounds. 4\. DIST(ortion): Adjusts the amount of distortion effect. Additional features include an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator, a footswitch to activate/deactivate the effect, ¼" TS IN and OUT connectors, and a DC IN connection for a 9V power supply (not included). The pedal is powered by a 9V battery or a 9V power supply. Technical specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

behringer Vintage Tube Monster

The Behringer Vintage Tube Monster VT999 is a classic vacuum tube overdrive pedal designed for electric guitars. It is based on a hand-selected BUGERA 12AX7B vacuum tube, providing a full-tone roar of a tube engine. The pedal allows for warm blues overdrive to heavy distortion. Key features and controls include: 1\. 9V power supply connection 2\. Power switch for activation/deactivation 3\. Power LED indicator 4\. ¼" TS OUT connector for sending the signal to the amp 5\. ¼" TS IN connector for instrument cable input 6\. THRESHOLD control for adjusting the input signal level 7\. NOISE GATE switch for noise reduction during quiet passages 8\. GAIN control for adjusting the amount of distortion 9\. TREBLE control for boosting/cutting the high-frequency range 10\. MID control for boosting/cutting the mid-frequency range 11\. BASS control for boosting/cutting the low-frequency range 12\. MASTER control for adjusting the output level 13\. BUGERA 12AX7B vacuum tube 14\. Footswitch for effect activation/deactivation 15\. DRIVE LED indicator for effect activation Technical specifications: \- Input connector: ¼" TS \- Input impedance: 510k ohms \- Output connector: ¼" TS \- Output impedance: 1k ohm \- Power supply: 9VDC, 300mA adaptor (included) \- Power consumption: 250mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg

UD300 Ultra Distortion

The Behringer UD300 Ultra Distortion pedal offers two distortion pedals in one, providing versatility for blues-rock rhythms and searing leads. It features a flexible dual-mode switch that allows users to choose between warm distortion for riff rock and screaming distortion for lead sounds. The pedal includes dedicated Level, Tone, and Distortion dials for creating a personalized distortion flavor. The status LED indicates when the pedal is activated, and the on-off switch maintains excellent signal integrity in bypass mode. The UD300 can be powered by a 9V battery or the optional PSU-SB DC power supply. The pedal is designed to clone the BOSS DS-2 Turbo Distortion and is suitable for punk, classic, alternative, and modern metal genres. The build quality is noted to be solid, although the body is made of plastic. Users have reported that it produces a good sound for its price and can be a budget-friendly option for distortion effects.

UT300 Ultra Tremolo

The Behringer UT300 Ultra Tremolo is a high-quality effects pedal designed to provide guitarists with easy-to-use tremolo effect styles, delivering classic, warm, and mind-bending tremolo effects of vintage '60s amps. The tremolo effect is achieved by periodic modulation of the input signal level, resulting in a continuous change from low to high level with a quivering, tremulous sound character. Key features and technical specifications include: \- Controls: RATE control for adjusting the speed of the tremolo effect, DEPTH control for adjusting the intensity of the effect, and WAVE control for altering the LFO waveform that modulates the input signal from triangle to square. \- LED Indicator: The ON/BATT LED illuminates when the effect is activated and serves as a battery level indicator. \- Footswitch: Use the footswitch to activate/deactivate the effect. \- Connectors: 1/4" TS IN connector for instrument cable input, 1/4" TS OUT connector for sending the signal to the amp, and DC IN connection for plugging in a 9V power supply (not included). \- Power Options: Can be powered by a 9V battery or a 9V DC power supply (sold separately). \- Physical Dimensions: Approximately 54 x 70 x 123 mm (H x W x D). \- Weight: Approximately 0.33 kg (0.73 lbs). Safety instructions and warranty details are also provided for user reference.

EQ700 Graphic Equalizer

The Behringer EQ700 is an ultimate 7-band graphic equalizer designed to shape your sound and eliminate feedback. It offers 15 dB of available boost or cut per band, allowing for precise control over the audio spectrum from below 100 Hz to over 6.4 kHz. The EQ700's seven frequency bands have been carefully optimized to provide the ultimate tools for EQ’ing your guitar, with special attention paid to the critical midrange frequencies. The EQ700 allows users to effectively cut or boost a slew of frequencies to help bring focus to their sound. It is particularly useful for sculpting the perfect guitar sound, with the ability to add warmth and body by boosting frequencies around 200 Hz - 400 Hz, and clarity to clean guitar signals by boosting frequencies in the 3.2 kHz - 6.4 kHz range. Additionally, it provides tips for applying EQ to the guitar, emphasizing the importance of understanding the frequency range of the instrument. The pedal is designed for use with guitar and keyboard and has been carefully engineered to compete head to head with leading products in the market.

FL600 Flanger Machine

The Behringer FL600 Flanger Machine is a high-quality effects pedal that offers 11 extraordinary flanger modes with extensive parameter control for maximum creativity. Here are the technical specifications and features: 1\. Controls: \- TYPE switch: Choose between high-fidelity digital flanger, vintage analog bucket-brigade delay, and classic studio flanger from the '70s (TAPE). \- TIME control: Adjust the flanger delay time. \- SPEED control: Determine the speed of the flanger effect. \- F.BACK control: Determine the amount of output signal fed back into the flanger input. \- DEPTH control: Achieve a fuller and deeper effect sound. \- Flanger effect modes: TRG DWN, TRG UP, CHORUS, VINTAGE, RANDOM, STEP, SINE, ENV UP, ENV DOWN, SAW UP, SAW DOWN. \- POL switch: Choose between negative and positive feedback flanger modes. 2\. Connectors: \- IN A/B: 1/4" TS, 500kΩ (stereo input) / 250kΩ (mono input) \- OUT A/B: 1/4" TS, 1kΩ (stereo output) 3\. Power: \- Power supply: 9V, 100mA, regulated (BEHRINGER PSU-SB, not included) \- Power connector: 2mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power consumption: 60mA 4\. Dimensions and Weight: \- Dimensions: Approx. 54mm (H) x 70mm (W) x 123mm (D) \- Weight: Approx. 0.33kg (0.73 lbs) 5\. Additional Information: \- The FL600 has no on/off switch and is activated as soon as the plug is inserted into the IN connector. \- The pedal cover houses the battery compartment for a 9V battery. \- The serial number is located on the underside of the pedal.

VP1 Vintage Phaser

The Behringer VP1 Vintage Phaser is a high-quality effect pedal designed to provide authentic and classic three-dimensional phase shifting, ranging from rapid rotary speaker to impressive jet plane effects. The pedal features the following controls and connectors: 1\. RATE control: Determines the speed of the phase shifting effect. 2\. TONE switch: Allows selection between negative feedback (lower position) or positive feedback (upper position) phaser modes. 3\. STATUS LED: Illuminates when the effect is activated. 4\. Footswitch: Activates/deactivates the effect. 5\. ¼" TS INPUT connector: Used to plug in the instrument cable. 6\. ¼" TS OUTPUT connector: Sends the signal to the amplifier. 7\. DC IN connection: Used to plug in a 9V power supply (not included). 8\. BATTERY COMPARTMENT: Located on the bottom for installing or replacing the 9V battery. Technical Specifications: \- Input Impedance: 100 kΩ \- Output Impedance: 15 kΩ \- Power Supply: 9V, 100 mA DC regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2.9 x 3.3 x 5.6" (H x W x D) \- Weight: Approximately 0.86 lbs / 0.39 kg The VP1 does not have an on/off switch and begins running as soon as the jack is inserted into the in connector. When not in use, it is recommended to remove the jack from the in connector to extend the battery life.

VD400 Vintage Delay

The Behringer VD400 Vintage Delay pedal is designed to deliver authentic delay sounds comparable to state-of-the-art studio processors. It offers up to 300 ms of true analog delay and vintage slap-back echo. The pedal features the following controls: 1\. REPEAT RATE: Adjusts the delay time (repetition rate). 2\. ECHO: Adjusts the effect output level. 3\. INTENSITY: Adjusts the number of repetitions. Other features include a status LED for effect on/off and battery check, dedicated intensity, echo, and repeat rate controls for sound shaping, and a first-class electronic on/off switch for the highest signal integrity in bypass mode. The technical specifications of the VD400 Vintage Delay pedal are as follows: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V battery or BEHRINGER PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The pedal is designed and engineered in Germany and comes with a 3-Year Warranty Program.

UC200 Ultra Chorus

The Behringer UC200 Ultra Chorus pedal is designed to deliver a super-thick chorus with an unbelievable stereo effect. It offers full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal, creating a pleasant detune effect in connection with pitch variation. The pedal features the following controls: 1\. LEVEL: Adjusts the output level 2\. TONE: Allows adjustment of the overall effects sound to achieve a more defined and brilliant tone 3\. RATE: Determines the chorus effect speed 4\. DEPTH: Adjusts to achieve a fuller, deeper effect sound The UC200 also includes an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator. The footswitch is used to activate/deactivate the effect. The pedal has one ¼" TS IN connector for the instrument cable and two ¼" TS connectors OUT A and OUT B to send the signal to the amp. For mono use, only the OUT A connector is needed, while both connectors are used for a full stereo chorus effect. The power supply for the UC200 is a 9V, 100 mA regulated Behringer PSU-SB. The pedal can also be powered by a 9V battery. The physical dimensions are approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), and it weighs approximately 0.73 lbs / 0.33 kg. The UC200 is designed to comply with FCC rules and has been tested to provide reasonable protection against harmful interference in a residential installation. It also complies with EU directives and regulations.

UF100 Ultra Flanger

The Behringer UF100 Ultra Flanger is a versatile effects pedal that offers two modes of operation: Mode I with negative feedback and Mode II for positive feedback. In Mode I, the signal is inverted before being mixed with the original, while Mode II does not invert the signal, resulting in a sound that is more out of tune with the original, making it ideal for vibrato-style effects. The pedal features dedicated controls for Manual, Depth, Rate, and Resonance, and is equipped with a blue LED to indicate when it's activated. The UF100 can be powered with a 9V battery or a PSU-SB DC Power Supply (not included). This pedal is designed to deliver a wide variety of classic and modern modulation-based sounds in a convenient and affordable package.

HF300

It features dedicated controls for manual, depth, rate, and resonance, allowing users to achieve a variety of flanging sounds. The pedal is designed to produce bright and clean flange effects, and it can be powered by a 9V battery or a PSU-SB DC power supply (not included). The HF300 also includes a blue status LED to indicate when the effect is activated and a high-quality on/off switch for maintaining signal integrity in bypass mode.

HF300 Hi Band Flanger

The Behringer HF300 Hi Band Flanger is an effects pedal designed to deliver high-quality flanging effects one octave higher than usual for guitars and keyboards. Here are the technical specifications and features: Controls: 1\. MANUAL control: Adjusts the delay length and determines the starting point for the modulation range. 2\. DEPTH control: Adjusts the flanger sweep range according to the delay time. 3\. RATE control: Adjusts the speed of the flanger’s low-frequency oscillator. 4\. RES (resonance) control: Determines the amount of output signal fed back to the flanger input to increase the resonance effect. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. Connectors: \- 1/4" TS IN connector: Plug in the instrument cable. \- 1/4" TS OUT connector: Sends the signal to the amp. \- DC IN connection: Plug in a 9V power supply (not included). \- Battery compartment: Located underneath the pedal cover for 9V battery installation. Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg Safety Instructions: \- Do not use near water or install near heat sources. \- Use only authorized attachments/accessories. \- Do not service the product yourself; contact qualified servicing personnel for repairs. Warranty: \- Register the equipment on the Behringer website and read the terms and conditions of the warranty carefully.

SF300 Super Fuzz

The Behringer SF300 Super Fuzz is a 3-mode fuzz distortion effects pedal designed for electric guitars, recreating a variety of famous fuzz tones from the '60s and '70s. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TREBLE: Allows boosting/cutting of the high-frequency range. 3\. BASS: Allows boosting/cutting of the low-frequency range. 4\. GAIN: Adjusts the gain for more distorted sounds. 5\. MODE switch: Selects between 3 effect modes: \- FUZZ 1: Basic fuzz sound with emphasis on the midrange. \- FUZZ 2: Full-bodied fuzz sound with scooped mids and sharp harmonics. \- BOOST: The Level control is inactive, and the Gain control adjusts the boost. Additional features include an ON/BATT LED that serves as a battery level indicator, a footswitch for activating/deactivating the effect, 1/4" TS IN and OUT connectors for instrument and amp connections, and a DC IN connection for a 9V power supply (not included). The pedal can also be powered by a 9V battery. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), or 54 x 70 x 123 mm \- Weight: Approximately 0.73 lbs / 0.33 kg

UZ400 Ultra Fuzz

The Behringer UZ400 Ultra Fuzz is a classic fuzz distortion effects pedal designed for electric guitars, aiming to recreate the classic and burning fuzz tone of the '60s and '70s. The pedal features dedicated controls for Fuzz, Tone, and Level, allowing for sound shaping and intensity adjustments. The blue LED serves as an indicator for effect activation and battery level. The pedal can be powered by a 9V battery or a PSU-SB DC power supply (not included). The technical specifications include: \- In Connector: 1/4" TS \- Impedance: 500 kΩ \- Out Connector: 1/4" TS \- Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The UZ400 Ultra Fuzz is designed to deliver vintage grit and sustaining power for leads, offering a straightforward interface for creating a dirty, powerful sound.

TM300 Tube Amp Modeler

The Behringer TM300 Tube Amp Modeler features authentic modeling technology for 3 classic guitar amps, 3 gain modes, and 3 mic placements, providing a total of 27 configurations to achieve sought-after tube amp sounds from clean to super-fat distortion. The pedal includes controls for LEVEL, LOW (boost/cut low-frequency range), HIGH (boost/cut high-frequency range), DRIVE (adjusts overdrive effect), MIC switch (simulates microphone placement), MODE switch (dial up one of 3 gain settings), and AMP switch (select one of 3 classic tube amps). The pedal also features an ON/BATT LED, footswitch, 1/4" TS IN and OUT connectors, DC IN connection for power supply, and a battery compartment. Technical specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9 V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs) The TM300 is designed to provide a wide range of tube amp sounds and offers flexibility in shaping tones for guitarists.

UO300 Ultra Octaver

The Behringer UO300 Ultra Octaver is a 3-mode octaver effects pedal designed to add depth and power to your sound. It generates notes one and two octaves below what you play, resulting in a powerful and impactful sound. The pedal features a dedicated Range control to specify whether you want to add beef to the high, middle, or low frequencies, as well as the Direct knob to adjust the level of the output. Additionally, the UO300 includes OCT 1 and OCT 2 controls to add the lower octaves. It is suitable for use with guitar, bass, keyboards, and can add incredible beef to various instruments. The status LED indicates when the pedal is active, and the on/off switch maintains superior signal integrity in bypass mode. The UO300 can be powered with a 9V battery or a PSU- SB DC power supply (not included).

US600 Ultra Shifter/Harmonist

The Behringer US600 Ultra Shifter/Harmonist is a high-quality effects pedal designed to shift single notes and chords, as well as create intelligent harmonies at the touch of a footswitch. It offers 5 unique modes: Tremolo Bar, Flutter, Detune, Harmonist, and Pitch Shifter. The pedal features Real Sound Modeling (RSM) technology, which delivers realistic detuning and harmony effects. The US600 operates on a 9-volt battery or an optional PSU-SB DC power supply. It includes various controls such as D TIME/SPEED, BALANCE, HR KEY, PITCH, and MODE to adjust the speed of pitch change, balance between direct and effect signal, key selection, pitch shifting, and mode selection, respectively. The pedal also provides connectors for instrument cable, output signals, expression pedal, and power supply. The technical specifications include impedance, power supply details, physical dimensions, and weight. The US600 complies with FCC rules and comes with safety instructions and warranty details.

PB100 Preamp Booster

The Behringer PB100 Preamp Booster is a high-quality effects pedal designed to boost the volume and shape the sound of any instrument. It features adjustable Bass, Treble, and Gain controls, allowing users to adjust the low-frequency and high-frequency ranges of the signal, as well as the amount of preamplification. The pedal also includes an ON/BATT LED that serves as a battery level indicator and illuminates when the effect is activated. The footswitch is used to activate/deactivate the effect, and the pedal is equipped with 1/4" TS IN and OUT connectors for instrument cable and amp connection. The PB100 can be powered by a 9V power supply or a 9V battery. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

BO100 Blues Overdrive

OD300 Overdrive/Distortion

The Behringer OD300 Overdrive/Distortion is a 2-mode effects pedal designed for electric guitars. It offers the ability to create state-of-the-art overdrive, distortion, or a combination of both effects. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TONE: Shapes the overall sound. 3\. DRIVE: Adjusts the intensity of the overdrive/distortion effect. 4\. MODE: Balances between overdrive and distortion effects, with the leftmost position providing pure overdrive and the rightmost position providing pure distortion. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. ¼" TS IN connector: Input for the instrument cable. 8\. ¼" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Input for a 9V power supply (not included). 10\. Battery compartment: Located underneath the pedal cover for 9V battery installation or replacement. The OD300 has no on/off switch and begins running as soon as the jack is inserted into the IN connector. When not in use, removing the jack from the IN connector extends the battery life. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

VT999 Vintage Tube Monster

The Behringer VT999 Vintage Tube Monster is a classic vacuum tube overdrive pedal designed to deliver a full-tone roar of a tube engine. Here are the technical specifications and features: 1\. Controls: \- 9V power supply connection \- Power switch for activation/deactivation \- Power LED indicator \- 1/4" TS OUT connector for sending the signal to the amp \- 1/4" TS IN connector for instrument cable \- THRESHOLD control for adjusting input signal level \- Integrated noise gate switch for noise reduction \- GAIN control for adjusting distortion level \- TREBLE control for boosting/cutting high-frequency range \- MID control for boosting/cutting mid-frequency range \- BASS control for boosting/cutting low-frequency range \- MASTER control for adjusting output level \- BUGERA 12AX7B vacuum tube placement \- Footswitch for effect activation/deactivation \- DRIVE LED indicator for effect activation 2\. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 510 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 300 mA adaptor (included) \- Power Consumption: 250 mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg 3\. Additional Features: \- Hand-selected 12AX7 vacuum tube for warm sound \- Integrated and switchable noise gate with adjustable threshold \- Onboard 3-band EQ for tone shaping \- Dedicated Gain and Master output level control \- True-bypass wiring for maintaining tone integrity \- Dedicated power supply included

BOD400 Bass Overdrive

The Behringer BOD400 Bass Overdrive pedal is designed to provide rich, tube- like distortion, smooth sustain, and a super-fat tone. It supports the entire frequency range of bass guitars, including 5 and 6-string models. The pedal features a BALANCE control to mix the overdriven signal with the natural bass sound for clarity and punch. It also includes a 2-band EQ, Gain, and Level controls, as well as a Balance control to blend in the right amount of clean tone while keeping the fundamental clear and providing maximum punch. The pedal operates on a 9V DC power supply or a 9V battery. The dimensions of the pedal are 70mm width, 123mm length, and 54mm height, with a weight of 0.33 kg.

OD400 Overdrive

The Behringer OD400 Overdrive pedal is designed to provide fat and big overdrive sounds with incredible dynamic response. It features the following technical specifications: Controls: 1\. LEVEL knob: Adjusts the output level. 2\. TONE knob: Shapes the overall sound. 3\. DRIVE knob: Adjusts the amount of the overdrive/distortion effect. 4\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 5\. Footswitch: Activates/deactivates the effect. Connectors: 1\. 1/4" TS IN: Instrument cable input. 2\. 1/4" TS OUT: Sends the signal to the amp. 3\. DC IN: Connection for a 9 V power supply (not included). 4\. Battery compartment: For a 9 V battery (not included). Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9 VDC, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The OD400 is designed to be constantly striving to maintain the highest professional standards, and modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

TO800 Vintage Tube Overdrive

The Behringer TO800 Vintage Tube Overdrive pedal is designed to deliver the classic sound of overdriven vacuum tubes. It features dedicated Drive, Tone, and Level controls, allowing users to shape their desired sound. The pedal is equipped with a status LED for effect on/off and battery check, providing visual feedback during operation. Internally, the TO800 utilizes a 4558 op amp and MA150 distortion diodes to capture the nuances of playing, from smooth overdrive to screaming tube sounds. The pedal operates on a 9V DC power supply and has input and output jacks for seamless integration into a pedalboard or amplifier setup. The compact dimensions of the pedal make it suitable for various pedalboard configurations, with a height of 2.125", width of 2.75", and depth of 4.8". Additionally, the pedal weighs 0.73 lbs, making it lightweight and portable for musicians on the go.

VT911 Vintage Tube Overdrive

The Behringer VT911 Vintage Tube Overdrive pedal is a high-quality classic tube overdrive pedal based on a hand-selected BUGERA 12AX7B vacuum tube. It offers a whole tube amp in a pedal, providing a range from warm blues overdrive to heavy distortion. The pedal features the following controls and specifications: Controls: 1\. 9V power supply connection 2\. ¼" TS OUT connector for sending the signal to the amp 3\. ¼" TS IN connector for instrument cable input 4\. LEVEL control for adjusting the output level 5\. TONE control for overall sound adjustment 6\. DRIVE control for adjusting the amount of distortion 7\. Footswitch for activating/deactivating the effect 8\. BUGERA 12AX7B vacuum tube placement Specifications: \- Input Connector: ¼" TS \- Input Impedance: 1 MΩ \- Output Connector: ¼" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 VDC, 300 mA (included) \- Power Consumption: 200 mA \- Dimensions: Approximately 2 4/5 x 5 x 6 ¼" (H x W x D) \- Weight: Approximately 1.80 lbs / 0.82 kg The pedal is designed to provide a distinctive tonal quality that only a real tube can deliver, bringing vintage distortion with the flexibility of modern technology.

behringer Vintage Tube Monster

The Behringer Vintage Tube Monster VT999 is a classic vacuum tube overdrive pedal designed for electric guitars. It is based on a hand-selected BUGERA 12AX7B vacuum tube, providing a full-tone roar of a tube engine. The pedal allows for warm blues overdrive to heavy distortion. Key features and controls include: 1\. 9V power supply connection 2\. Power switch for activation/deactivation 3\. Power LED indicator 4\. ¼" TS OUT connector for sending the signal to the amp 5\. ¼" TS IN connector for instrument cable input 6\. THRESHOLD control for adjusting the input signal level 7\. NOISE GATE switch for noise reduction during quiet passages 8\. GAIN control for adjusting the amount of distortion 9\. TREBLE control for boosting/cutting the high-frequency range 10\. MID control for boosting/cutting the mid-frequency range 11\. BASS control for boosting/cutting the low-frequency range 12\. MASTER control for adjusting the output level 13\. BUGERA 12AX7B vacuum tube 14\. Footswitch for effect activation/deactivation 15\. DRIVE LED indicator for effect activation Technical specifications: \- Input connector: ¼" TS \- Input impedance: 510k ohms \- Output connector: ¼" TS \- Output impedance: 1k ohm \- Power supply: 9VDC, 300mA adaptor (included) \- Power consumption: 250mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg

SP400 Super Phase Shifter

CO600 Chorus Orchestra

The Behringer CO600 Chorus Orchestra is an ultimate stereo chorus effects pedal designed to suit various music styles. Here are the technical specifications and features: \- Controls: LEVEL, RATE, HIGH, LOW, DEPTH, ON/BATT LED, footswitch \- Connectors: 1/4" TS IN, 1/4" TS OUT A, 1/4" TS OUT B, DC IN \- Power Supply: 9 V battery or Behringer PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs) \- Impedance: 500 kΩ (In), 1 kΩ (Out A, Out B) \- Warranty: 3-Year Warranty Program The CO600 offers a warm vintage chorus, super-thick stereo effects, and a shifting detuned signal to create an orchestral stereo chorus effect. It also features a 2-band EQ, dedicated Depth, Rate, and Level controls for sound shaping, and a status LED for effect on/off and battery check. The pedal can be powered by a 9 V battery or the Behringer PSU-SB DC power supply. Additionally, it includes safety instructions and compliance information.

TM300 Tube Amp Modeler

The Behringer TM300 Tube Amp Modeler features authentic modeling technology for 3 classic guitar amps, 3 gain modes, and 3 mic placements, providing a total of 27 configurations to achieve sought-after tube amp sounds from clean to super-fat distortion. The pedal includes controls for LEVEL, LOW (boost/cut low-frequency range), HIGH (boost/cut high-frequency range), DRIVE (adjusts overdrive effect), MIC switch (simulates microphone placement), MODE switch (dial up one of 3 gain settings), and AMP switch (select one of 3 classic tube amps). The pedal also features an ON/BATT LED, footswitch, 1/4" TS IN and OUT connectors, DC IN connection for power supply, and a battery compartment. Technical specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9 V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs) The TM300 is designed to provide a wide range of tube amp sounds and offers flexibility in shaping tones for guitarists.

BUC400 Ultra Bass Chorus

The Behringer BUC400 Ultra Bass Chorus is an effects pedal specifically designed for bass guitars. It offers a warm, rich chorus effect to the upper frequency range of the signal while retaining the punch and definition of the bottom-end. The pedal features controls for LEVEL, LOW FILTER, RATE, and DEPTH, allowing users to adjust the output level, tone definition, chorus speed, and depth of the effect. The pedal also includes an ON/BATT LED indicator, footswitch for activation, and 1/4" TS connectors for input and output. It can be powered by a 9V battery or a 9V power supply. The BUC400 is designed to provide a super-thick chorus with an unbelievable stereo effect, and it is built to compete head-to-head with leading products in the market. The technical specifications include impedance values for the input and output connectors, power supply requirements, physical dimensions, and weight. The BUC400 is part of Behringer's efforts to maintain high professional standards and may undergo modifications without prior notice.

FL600 Flanger Machine

The Behringer FL600 Flanger Machine is a high-quality effects pedal that offers 11 extraordinary flanger modes with extensive parameter control for maximum creativity. Here are the technical specifications and features: 1\. Controls: \- TYPE switch: Choose between high-fidelity digital flanger, vintage analog bucket-brigade delay, and classic studio flanger from the '70s (TAPE). \- TIME control: Adjust the flanger delay time. \- SPEED control: Determine the speed of the flanger effect. \- F.BACK control: Determine the amount of output signal fed back into the flanger input. \- DEPTH control: Achieve a fuller and deeper effect sound. \- Flanger effect modes: TRG DWN, TRG UP, CHORUS, VINTAGE, RANDOM, STEP, SINE, ENV UP, ENV DOWN, SAW UP, SAW DOWN. \- POL switch: Choose between negative and positive feedback flanger modes. 2\. Connectors: \- IN A/B: 1/4" TS, 500kΩ (stereo input) / 250kΩ (mono input) \- OUT A/B: 1/4" TS, 1kΩ (stereo output) 3\. Power: \- Power supply: 9V, 100mA, regulated (BEHRINGER PSU-SB, not included) \- Power connector: 2mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power consumption: 60mA 4\. Dimensions and Weight: \- Dimensions: Approx. 54mm (H) x 70mm (W) x 123mm (D) \- Weight: Approx. 0.33kg (0.73 lbs) 5\. Additional Information: \- The FL600 has no on/off switch and is activated as soon as the plug is inserted into the IN connector. \- The pedal cover houses the battery compartment for a 9V battery. \- The serial number is located on the underside of the pedal.

VP1 Vintage Phaser

The Behringer VP1 Vintage Phaser is a high-quality effect pedal designed to provide authentic and classic three-dimensional phase shifting, ranging from rapid rotary speaker to impressive jet plane effects. The pedal features the following controls and connectors: 1\. RATE control: Determines the speed of the phase shifting effect. 2\. TONE switch: Allows selection between negative feedback (lower position) or positive feedback (upper position) phaser modes. 3\. STATUS LED: Illuminates when the effect is activated. 4\. Footswitch: Activates/deactivates the effect. 5\. ¼" TS INPUT connector: Used to plug in the instrument cable. 6\. ¼" TS OUTPUT connector: Sends the signal to the amplifier. 7\. DC IN connection: Used to plug in a 9V power supply (not included). 8\. BATTERY COMPARTMENT: Located on the bottom for installing or replacing the 9V battery. Technical Specifications: \- Input Impedance: 100 kΩ \- Output Impedance: 15 kΩ \- Power Supply: 9V, 100 mA DC regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2.9 x 3.3 x 5.6" (H x W x D) \- Weight: Approximately 0.86 lbs / 0.39 kg The VP1 does not have an on/off switch and begins running as soon as the jack is inserted into the in connector. When not in use, it is recommended to remove the jack from the in connector to extend the battery life.

DC9 Compressor

The Behringer DC9 Dynamics Compressor is a guitar effects pedal designed to provide stable dynamics and sustain to the guitar signal without degrading the original sound. It can also boost the overall volume of the instrument for solo parts. The compressor limits the dynamic range of the signal by attenuating signal peaks exceeding a certain threshold level, resulting in a more powerful and punchy tone. Key Features and Controls: 1\. Sensitivity Control: Determines the compression ratio, intensifying compression as the sensitivity value increases. 2\. Output Control: Adjusts the output level to compensate for gain reduction or boost the instrument's output level. 3\. LED Indicator: Illuminates when the effect is activated and serves as a battery level indicator. 4\. Footswitch: Depress to activate/deactivate the effect. 5\. Input and Output Connectors: 1/4" TS connectors for instrument and amp connections. 6\. Power Supply: 9V power supply or 9V battery (not included). Technical Specifications: \- Input Impedance: 1 MΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 9 mA \- Dimensions: Approximately 56 x 113 x 69 mm (H x W x D) \- Weight: Approximately 0.24 kg (0.53 lbs) Safety Instructions: \- Do not use near water or heat sources. \- Use only authorized attachments/accessories. \- Do not attempt to service the product yourself.

PB100 Preamp Booster

The Behringer PB100 Preamp Booster is a high-quality effects pedal designed to boost the volume and shape the sound of any instrument. It features adjustable Bass, Treble, and Gain controls, allowing users to adjust the low-frequency and high-frequency ranges of the signal, as well as the amount of preamplification. The pedal also includes an ON/BATT LED that serves as a battery level indicator and illuminates when the effect is activated. The footswitch is used to activate/deactivate the effect, and the pedal is equipped with 1/4" TS IN and OUT connectors for instrument cable and amp connection. The PB100 can be powered by a 9V power supply or a 9V battery. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

UO300 Ultra Octaver

The Behringer UO300 Ultra Octaver is a 3-mode octaver effects pedal designed to add depth and power to your sound. It generates notes one and two octaves below what you play, resulting in a powerful and impactful sound. The pedal features a dedicated Range control to specify whether you want to add beef to the high, middle, or low frequencies, as well as the Direct knob to adjust the level of the output. Additionally, the UO300 includes OCT 1 and OCT 2 controls to add the lower octaves. It is suitable for use with guitar, bass, keyboards, and can add incredible beef to various instruments. The status LED indicates when the pedal is active, and the on/off switch maintains superior signal integrity in bypass mode. The UO300 can be powered with a 9V battery or a PSU- SB DC power supply (not included).

US600 Ultra Shifter/Harmonist

The Behringer US600 Ultra Shifter/Harmonist is a high-quality effects pedal designed to shift single notes and chords, as well as create intelligent harmonies at the touch of a footswitch. It offers 5 unique modes: Tremolo Bar, Flutter, Detune, Harmonist, and Pitch Shifter. The pedal features Real Sound Modeling (RSM) technology, which delivers realistic detuning and harmony effects. The US600 operates on a 9-volt battery or an optional PSU-SB DC power supply. It includes various controls such as D TIME/SPEED, BALANCE, HR KEY, PITCH, and MODE to adjust the speed of pitch change, balance between direct and effect signal, key selection, pitch shifting, and mode selection, respectively. The pedal also provides connectors for instrument cable, output signals, expression pedal, and power supply. The technical specifications include impedance, power supply details, physical dimensions, and weight. The US600 complies with FCC rules and comes with safety instructions and warranty details.

BO100 Blues Overdrive

VD400 Vintage Delay

The Behringer VD400 Vintage Delay pedal is designed to deliver authentic delay sounds comparable to state-of-the-art studio processors. It offers up to 300 ms of true analog delay and vintage slap-back echo. The pedal features the following controls: 1\. REPEAT RATE: Adjusts the delay time (repetition rate). 2\. ECHO: Adjusts the effect output level. 3\. INTENSITY: Adjusts the number of repetitions. Other features include a status LED for effect on/off and battery check, dedicated intensity, echo, and repeat rate controls for sound shaping, and a first-class electronic on/off switch for the highest signal integrity in bypass mode. The technical specifications of the VD400 Vintage Delay pedal are as follows: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V battery or BEHRINGER PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The pedal is designed and engineered in Germany and comes with a 3-Year Warranty Program.

TP300 Ultra Tremolo/Pan

The Behringer TP300 Ultra Tremolo/Pan is a high-quality effects pedal designed to provide guitarists with easy-to-use tremolo and panning effect styles. It offers classic, warm, and mind-bending tremolo/panning effects reminiscent of vintage '60s amps. The pedal features dedicated Depth, Rate, and Mode controls for sound shaping, along with a MODE switch to select between 2 tremolo modes and 2 panning modes. The DEPTH control adjusts the amount of fluctuation, while the RATE control adjusts the speed of the fluctuation. The pedal also includes a status LED for effect on/off and battery check, and a footswitch to activate/deactivate the effect. Technical Specifications: \- In A Connector: 1/4" TS, Impedance 500 kΩ \- In B Connector: 1/4" TS, Impedance 500 kΩ \- Out A / Out B Connector: 1/4" TS, Impedance 1 kΩ \- Power Supply: 9 V type 6LR61 battery or BEHRINGER PSU-SB \- Power Consumption: 30 mA \- Mains Connection: 100 V - 230 V, 50/60 Hz \- Device Connection: 2 mm DC jack, negative center \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs)

Rotary Machine RM600

The Behringer Rotary Machine RM600 is an effects pedal that delivers a wide range of 3-dimensional rotary speaker effects. It allows users to experience the classic and swirling sounds of famous signature rotary speakers in one compact pedal. The pedal features the following controls: 1\. FAST control: Adjusts the rotating speed of the drum and the horn when FAST mode is activated. 2\. SLOW control: Adjusts the rotating speed of the drum and the horn when SLOW mode is activated. 3\. DRIVE control: Adjusts the amount of tube-like overdrive. 4\. BLEND control: Adjusts the balance between the horn and the drum speaker. 5\. RAMP switch: Controls the time it takes to go from fast to slow rotary speed and vice versa. 6\. MODEL switch: Selects between 3 famous signature rotary speakers (145, L16, and 122). 7\. ON/BATT LED: Illuminates when active, indicating the modulation speed. 8\. Footswitch: Activates/deactivates the effect and allows switching between fast and slow modulation modes. 9\. IN A and IN B connectors: Used to plug in the instrument cables. 10\. OUT A and OUT B connectors: Send the signal to the amp, allowing for full stereo rotary effect. The pedal operates on a 9V power supply or a 9V battery and has the following technical specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Consumption: 60 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

OD300 Overdrive/Distortion

The Behringer OD300 Overdrive/Distortion is a 2-mode effects pedal designed for electric guitars. It offers the ability to create state-of-the-art overdrive, distortion, or a combination of both effects. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TONE: Shapes the overall sound. 3\. DRIVE: Adjusts the intensity of the overdrive/distortion effect. 4\. MODE: Balances between overdrive and distortion effects, with the leftmost position providing pure overdrive and the rightmost position providing pure distortion. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. ¼" TS IN connector: Input for the instrument cable. 8\. ¼" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Input for a 9V power supply (not included). 10\. Battery compartment: Located underneath the pedal cover for 9V battery installation or replacement. The OD300 has no on/off switch and begins running as soon as the jack is inserted into the IN connector. When not in use, removing the jack from the IN connector extends the battery life. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

UC200 Ultra Chorus

The Behringer UC200 Ultra Chorus pedal is designed to deliver a super-thick chorus with an unbelievable stereo effect. It offers full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal, creating a pleasant detune effect in connection with pitch variation. The pedal features the following controls: 1\. LEVEL: Adjusts the output level 2\. TONE: Allows adjustment of the overall effects sound to achieve a more defined and brilliant tone 3\. RATE: Determines the chorus effect speed 4\. DEPTH: Adjusts to achieve a fuller, deeper effect sound The UC200 also includes an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator. The footswitch is used to activate/deactivate the effect. The pedal has one ¼" TS IN connector for the instrument cable and two ¼" TS connectors OUT A and OUT B to send the signal to the amp. For mono use, only the OUT A connector is needed, while both connectors are used for a full stereo chorus effect. The power supply for the UC200 is a 9V, 100 mA regulated Behringer PSU-SB. The pedal can also be powered by a 9V battery. The physical dimensions are approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), and it weighs approximately 0.73 lbs / 0.33 kg. The UC200 is designed to comply with FCC rules and has been tested to provide reasonable protection against harmful interference in a residential installation. It also complies with EU directives and regulations.

CS400 Compressor/Sustainer

The Behringer CS400 Compressor/Sustainer pedal is designed to provide super- smooth compression and endless sustain for electric guitars. It competes head- to-head with leading products in the market and offers the following technical specifications and features: \- Pedal Type: Compressor/Sustain \- Analog/Digital: Analog \- Inputs: 1 x 1/4" \- Outputs: 1 x 1/4" \- Power Source: 9V DC power supply required \- Controls: Level control, Tone, Attack, and Sustain \- Dimensions: 2.125 × 2.75 × 4.8 inches \- Power supply: 9 V, 100 mA regulated \- Output impedance: 1 kΩ The CS400 is specifically designed to achieve super-smooth compression and endless sustain, enhancing the dynamic range of the guitar. It features dedicated controls for Sustain, Level, and Attack time, allowing for precise adjustments to achieve the desired sound. The pedal is suitable for a wide range of playing styles and provides consistent volume and ultra-stable dynamics.

SM200 Slow Motion

SF300 Super Fuzz

The Behringer SF300 Super Fuzz is a 3-mode fuzz distortion effects pedal designed for electric guitars, recreating a variety of famous fuzz tones from the '60s and '70s. The pedal features the following controls: 1\. LEVEL: Adjusts the output level. 2\. TREBLE: Allows boosting/cutting of the high-frequency range. 3\. BASS: Allows boosting/cutting of the low-frequency range. 4\. GAIN: Adjusts the gain for more distorted sounds. 5\. MODE switch: Selects between 3 effect modes: \- FUZZ 1: Basic fuzz sound with emphasis on the midrange. \- FUZZ 2: Full-bodied fuzz sound with scooped mids and sharp harmonics. \- BOOST: The Level control is inactive, and the Gain control adjusts the boost. Additional features include an ON/BATT LED that serves as a battery level indicator, a footswitch for activating/deactivating the effect, 1/4" TS IN and OUT connectors for instrument and amp connections, and a DC IN connection for a 9V power supply (not included). The pedal can also be powered by a 9V battery. Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), or 54 x 70 x 123 mm \- Weight: Approximately 0.73 lbs / 0.33 kg

VT999 Vintage Tube Monster

The Behringer VT999 Vintage Tube Monster is a classic vacuum tube overdrive pedal designed to deliver a full-tone roar of a tube engine. Here are the technical specifications and features: 1\. Controls: \- 9V power supply connection \- Power switch for activation/deactivation \- Power LED indicator \- 1/4" TS OUT connector for sending the signal to the amp \- 1/4" TS IN connector for instrument cable \- THRESHOLD control for adjusting input signal level \- Integrated noise gate switch for noise reduction \- GAIN control for adjusting distortion level \- TREBLE control for boosting/cutting high-frequency range \- MID control for boosting/cutting mid-frequency range \- BASS control for boosting/cutting low-frequency range \- MASTER control for adjusting output level \- BUGERA 12AX7B vacuum tube placement \- Footswitch for effect activation/deactivation \- DRIVE LED indicator for effect activation 2\. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 510 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 300 mA adaptor (included) \- Power Consumption: 250 mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg 3\. Additional Features: \- Hand-selected 12AX7 vacuum tube for warm sound \- Integrated and switchable noise gate with adjustable threshold \- Onboard 3-band EQ for tone shaping \- Dedicated Gain and Master output level control \- True-bypass wiring for maintaining tone integrity \- Dedicated power supply included

BOD400 Bass Overdrive

The Behringer BOD400 Bass Overdrive pedal is designed to provide rich, tube- like distortion, smooth sustain, and a super-fat tone. It supports the entire frequency range of bass guitars, including 5 and 6-string models. The pedal features a BALANCE control to mix the overdriven signal with the natural bass sound for clarity and punch. It also includes a 2-band EQ, Gain, and Level controls, as well as a Balance control to blend in the right amount of clean tone while keeping the fundamental clear and providing maximum punch. The pedal operates on a 9V DC power supply or a 9V battery. The dimensions of the pedal are 70mm width, 123mm length, and 54mm height, with a weight of 0.33 kg.

UF100 Ultra Flanger

The Behringer UF100 Ultra Flanger is a versatile effects pedal that offers two modes of operation: Mode I with negative feedback and Mode II for positive feedback. In Mode I, the signal is inverted before being mixed with the original, while Mode II does not invert the signal, resulting in a sound that is more out of tune with the original, making it ideal for vibrato-style effects. The pedal features dedicated controls for Manual, Depth, Rate, and Resonance, and is equipped with a blue LED to indicate when it's activated. The UF100 can be powered with a 9V battery or a PSU-SB DC Power Supply (not included). This pedal is designed to deliver a wide variety of classic and modern modulation-based sounds in a convenient and affordable package.

FM600 Filter Machine

The Behringer FM600 Filter Machine is an ultimate Filter Modeler that delivers a range of filter effects, including funky auto-wah, twin, band-pass, and swirling low-pass filter effects at the touch of a footswitch. The FM600 features various controls and connectors, including the FILTER switch for selecting filter types, SENS knob for sensitivity adjustment, PEAK knob for defining the shape of the filter, POL switch for determining filter frequency movement, RANGE knob for altering the travel range of the filter frequency, ON/BATT LED for effect activation status, footswitch for effect on/off, and 1/4" TS connectors for input and output. The unit can be powered by a 9V power supply or a 9V battery. The technical specifications include input and output impedance, power supply details for different regions, power consumption, physical dimensions, and weight. The FM600 complies with FCC rules and comes with safety instructions and warranty details.

HF300

It features dedicated controls for manual, depth, rate, and resonance, allowing users to achieve a variety of flanging sounds. The pedal is designed to produce bright and clean flange effects, and it can be powered by a 9V battery or a PSU-SB DC power supply (not included). The HF300 also includes a blue status LED to indicate when the effect is activated and a high-quality on/off switch for maintaining signal integrity in bypass mode.

DC9 Dynamics Compressor

The Behringer DC9 Dynamics Compressor is a compact guitar effects pedal designed to provide stable dynamics and endless sustain to your guitar by evening out the signal without degrading the original sound. It can also be used to boost the overall volume of your instrument for solo parts. The compressor limits the dynamic range of a signal by attenuating signal peaks exceeding a certain threshold level, with the amount of gain reduction determined by the compression ratio. The result of compression is an attenuation of the difference between the loudest and softest playing, achieving a more powerful and punchy tone. Key features and controls include: 1\. Sensitivity control: Determines the compression ratio, intensifying compression as the sensitivity value is increased. 2\. Output control: Adjusts the output level to compensate for gain reduction resulting from compression or to boost the instrument's output level. 3\. LED indicator: Illuminates when the effect is activated and serves as a battery level indicator. 4\. Footswitch: Depress to activate/deactivate the effect. 5\. Input and output connectors: 1/4" TS connectors for instrument cable and amp connection. 6\. Power supply: 9V power supply (not included) or 9V battery. Technical specifications: \- Input impedance: 1 MΩ \- Output impedance: 1 kΩ \- Power supply: 9V, 100 mA regulated \- Power consumption: 9 mA \- Dimensions: Approximately 2 1/5 x 4 2/5 x 2 2/3" (H x W x D) \- Weight: Approximately 0.53 lbs / 0.24 kg

EQ700 Graphic Equalizer

The Behringer EQ700 is an ultimate 7-band graphic equalizer designed to shape your sound and eliminate feedback. It offers 15 dB of available boost or cut per band, allowing for precise control over the audio spectrum from below 100 Hz to over 6.4 kHz. The EQ700's seven frequency bands have been carefully optimized to provide the ultimate tools for EQ’ing your guitar, with special attention paid to the critical midrange frequencies. The EQ700 allows users to effectively cut or boost a slew of frequencies to help bring focus to their sound. It is particularly useful for sculpting the perfect guitar sound, with the ability to add warmth and body by boosting frequencies around 200 Hz - 400 Hz, and clarity to clean guitar signals by boosting frequencies in the 3.2 kHz - 6.4 kHz range. Additionally, it provides tips for applying EQ to the guitar, emphasizing the importance of understanding the frequency range of the instrument. The pedal is designed for use with guitar and keyboard and has been carefully engineered to compete head to head with leading products in the market.

BLE100 Bass Limiter Enhancer

OD400 Overdrive

The Behringer OD400 Overdrive pedal is designed to provide fat and big overdrive sounds with incredible dynamic response. It features the following technical specifications: Controls: 1\. LEVEL knob: Adjusts the output level. 2\. TONE knob: Shapes the overall sound. 3\. DRIVE knob: Adjusts the amount of the overdrive/distortion effect. 4\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 5\. Footswitch: Activates/deactivates the effect. Connectors: 1\. 1/4" TS IN: Instrument cable input. 2\. 1/4" TS OUT: Sends the signal to the amp. 3\. DC IN: Connection for a 9 V power supply (not included). 4\. Battery compartment: For a 9 V battery (not included). Technical Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9 VDC, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The OD400 is designed to be constantly striving to maintain the highest professional standards, and modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

UP300 Ultra Phase Shifter

The Behringer UP300 Ultra Phase Shifter is a 2-Mode Phaser Effects Pedal designed to provide a wide range of sonic possibilities. It features two distinctly different phase shifters built into one pedal, allowing access to various shades of sonic effects. The pedal is equipped with dedicated Level, Rate, Depth, and Resonance controls for sound shaping. Additionally, it includes a status LED for effect on/off and battery check, and it can be powered by a 9V battery or the BEHRINGER PSU-SB DC power supply. The pedal also features a high-quality electronic On/Off switch for signal integrity in bypass mode and is built with high-quality components for rugged construction and long life. The UP300 is covered by a 3-Year Warranty Program and is designed to compete with leading products on the market.

DW400 Dynamic Wah

The Behringer DW400 Dynamic Wah is an ultimate Auto-Wah/Human Voice effects pedal designed to create classic wah effects and unbelievable human-voice "talking" sounds. It features Real Sound Modeling (RSM) technology that combines state-of-the-art DSP with sophisticated algorithms to emulate the human voice like nothing of its kind. The pedal offers three modes: Synth/Up/Down, Human Voice, and Tap Tempo Modes, allowing for versatile sound manipulation. Users can control the frequency sweeps by tapping a tempo with their foot or by setting the dials. Additionally, the DW400 can be powered with a 9V battery or a DC Power Supply (not included). The pedal also supports the use of an expression pedal for manual control of the sweep.

UZ400 Ultra Fuzz

The Behringer UZ400 Ultra Fuzz is a classic fuzz distortion effects pedal designed for electric guitars, aiming to recreate the classic and burning fuzz tone of the '60s and '70s. The pedal features dedicated controls for Fuzz, Tone, and Level, allowing for sound shaping and intensity adjustments. The blue LED serves as an indicator for effect activation and battery level. The pedal can be powered by a 9V battery or a PSU-SB DC power supply (not included). The technical specifications include: \- In Connector: 1/4" TS \- Impedance: 500 kΩ \- Out Connector: 1/4" TS \- Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The UZ400 Ultra Fuzz is designed to deliver vintage grit and sustaining power for leads, offering a straightforward interface for creating a dirty, powerful sound.

UV300 Ultra Vibrato

The Behringer UV300 Ultra Vibrato is a high-quality effects pedal designed to deliver classic pitch modulation and dimensional vibrato effects from the '60s and '70s. The pedal features comprehensive controls that allow users to tailor the performance to their specific needs. Here are the technical specifications and features of the UV300 Ultra Vibrato: Controls: 1\. MODE switch: Changes the functionality of the effects pedal footswitch. It can be set to LATCH, UNLATCH, or BYPASS mode. 2\. RISE control: Adjusts the time needed for the effect to reach its maximum detuning. 3\. RATE control: Determines the speed of the vibrato effect. 4\. DEPTH control: Adjusts the intensity of the pitch modulation effect. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. 7\. 1/4" TS IN connector: Used to plug in the instrument cable. 8\. 1/4" TS OUT connector: Sends the signal to the amplifier. 9\. DC IN connection: Used to plug in a 9V power supply (not included). 10\. BATTERY COMPARTMENT: Located underneath the pedal cover for installing or replacing the 9V battery (not included). Technical Specifications: \- In Connector: 1/4" TS \- Impedance: 500 kΩ \- Out Connector: 1/4" TS \- Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The UV300 Ultra Vibrato pedal does not have an on/off switch. It is activated as soon as the plug is inserted into the IN connector. The SERIAL NUMBER is located at the underside of the pedal. The UV300 is part of the MUSIC Group, and all trademarks are the property of their respective owners.

UM300 Ultra Metal

The Behringer UM300 Ultra Metal is a high-quality effects pedal designed to produce extreme hard rock and heavy metal distortion sounds. It features a dual-gain circuitry that enables the production of super thick, tube-like distortion and endless sustain. The pedal includes the following controls: 1\. LOW control for boosting/cutting the low-frequency range 2\. Two MID FREQ controls for boosting/cutting a defined mid-frequency range, with the upper control adjusting the mid range and the lower control adjusting the center frequency 3\. LEVEL control for adjusting the output level 4\. ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator 5\. Footswitch for activating/deactivating the effect 6\. ¼" TS IN connector for plugging in the instrument cable 7\. ¼" TS OUT connector for sending the signal to the amp 8\. DC IN connection for plugging in a 9V power supply (not included) 9\. Battery compartment located underneath the pedal cover The UM300 does not have an on/off switch. It begins running as soon as the jack is inserted into the IN connector. The pedal's dimensions are approximately 54 x 70 x 123 mm (H x W x D), and it weighs approximately 0.33 kg (0.7 lbs). The power supply requirements include a 9V battery or a 9VDC power supply.

XD300 Distortion-X

The Behringer XD300 Distortion-X is a high-quality effects pedal designed to produce super thick, tube-like distortion and endless sustain. It features the following controls: 1\. LEVEL: Adjusts the output level. 2\. CONTOUR: Modifies the tone of the signal from traditional to super-modern sounds. 3\. PUNCH: Adds aggressive mid-frequency punch to the signal for more distinctive distortion sounds. 4\. DIST(ortion): Adjusts the amount of distortion effect. Additional features include an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator, a footswitch to activate/deactivate the effect, ¼" TS IN and OUT connectors, and a DC IN connection for a 9V power supply (not included). The pedal is powered by a 9V battery or a 9V power supply. Technical specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Connector: 2 mm DC jack, negative center \- Battery: 9V type 6LR61 \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

RV600 Reverb Machine

The Behringer RV600 Reverb Machine is an ultimate reverb modeling effects pedal designed to deliver 24-bit, high-resolution stereo reverbs comparable to state-of-the-art studio processors. It features 11 well-known modes and extensive parameter control for maximum creativity. The pedal includes various controls such as TONE, MIX, DECAY, TIME, and TRAILS switch for smooth fading of the reverb when bypassed. The RV600 also offers 11 reverb type effects, including ECHO, TILE, CAVE, SPACE, DUCKNG, HALL, CHMBR, ROOM, PLATE, SPRING, and '63 SP. Additionally, it provides two 1/4" TS connectors for stereo input and output, and a footswitch for effect activation/deactivation. The technical specifications of the RV600 are as follows: \- Input Connectors: 1/4" TS (IN A and IN B) \- Output Connectors: 1/4" TS (OUT A and OUT B) \- Power Supply: 9 V, 100 mA regulated (BEHRINGER PSU-SB) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The RV600 is designed without an on/off switch and is powered by a 9 V battery or a 9 V power supply. It is important to note that the technical specifications and appearances are subject to change without notice.

VT911 Vintage Tube Overdrive

The Behringer VT911 Vintage Tube Overdrive pedal is a high-quality classic tube overdrive pedal based on a hand-selected BUGERA 12AX7B vacuum tube. It offers a whole tube amp in a pedal, providing a range from warm blues overdrive to heavy distortion. The pedal features the following controls and specifications: Controls: 1\. 9V power supply connection 2\. ¼" TS OUT connector for sending the signal to the amp 3\. ¼" TS IN connector for instrument cable input 4\. LEVEL control for adjusting the output level 5\. TONE control for overall sound adjustment 6\. DRIVE control for adjusting the amount of distortion 7\. Footswitch for activating/deactivating the effect 8\. BUGERA 12AX7B vacuum tube placement Specifications: \- Input Connector: ¼" TS \- Input Impedance: 1 MΩ \- Output Connector: ¼" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 VDC, 300 mA (included) \- Power Consumption: 200 mA \- Dimensions: Approximately 2 4/5 x 5 x 6 ¼" (H x W x D) \- Weight: Approximately 1.80 lbs / 0.82 kg The pedal is designed to provide a distinctive tonal quality that only a real tube can deliver, bringing vintage distortion with the flexibility of modern technology.

TU300 Chromatic Tuner

The Behringer TU300 Chromatic Tuner is a compact guitar and bass tuner that provides 7 different tuning modes. It offers 3 guitar modes (regular, flat, double flat), 3 bass modes (regular, flat, double flat), and a chromatic setting. The reference tone is adjustable from 438 Hz to 447 Hz, and it features a mute/bypass function for silent tuning. The tuner is equipped with a 7-segment LED display and 11-point LED indicators, providing accurate tuning. It can be powered by a 9V battery or a PSU-SB DC power supply. The TU300 also includes a main Out jack for cutting the signal to the amp while tuning, as well as a Bypass output for sending a constant signal. The status LED indicates when the tuner is activated, and it has a solid electronic on/off switch for maintaining signal integrity in bypass mode.

behringer Vintage Tube Monster

The Behringer Vintage Tube Monster VT999 is a classic vacuum tube overdrive pedal designed for electric guitars. It is based on a hand-selected BUGERA 12AX7B vacuum tube, providing a full-tone roar of a tube engine. The pedal allows for warm blues overdrive to heavy distortion. Key features and controls include: 1\. 9V power supply connection 2\. Power switch for activation/deactivation 3\. Power LED indicator 4\. ¼" TS OUT connector for sending the signal to the amp 5\. ¼" TS IN connector for instrument cable input 6\. THRESHOLD control for adjusting the input signal level 7\. NOISE GATE switch for noise reduction during quiet passages 8\. GAIN control for adjusting the amount of distortion 9\. TREBLE control for boosting/cutting the high-frequency range 10\. MID control for boosting/cutting the mid-frequency range 11\. BASS control for boosting/cutting the low-frequency range 12\. MASTER control for adjusting the output level 13\. BUGERA 12AX7B vacuum tube 14\. Footswitch for effect activation/deactivation 15\. DRIVE LED indicator for effect activation Technical specifications: \- Input connector: ¼" TS \- Input impedance: 510k ohms \- Output connector: ¼" TS \- Output impedance: 1k ohm \- Power supply: 9VDC, 300mA adaptor (included) \- Power consumption: 250mA \- Dimensions: Approximately 2.4 x 8.7 x 6.7" (H x W x D) \- Weight: Approximately 3.02 lbs / 1.37 kg

UD300 Ultra Distortion

The Behringer UD300 Ultra Distortion pedal offers two distortion pedals in one, providing versatility for blues-rock rhythms and searing leads. It features a flexible dual-mode switch that allows users to choose between warm distortion for riff rock and screaming distortion for lead sounds. The pedal includes dedicated Level, Tone, and Distortion dials for creating a personalized distortion flavor. The status LED indicates when the pedal is activated, and the on-off switch maintains excellent signal integrity in bypass mode. The UD300 can be powered by a 9V battery or the optional PSU-SB DC power supply. The pedal is designed to clone the BOSS DS-2 Turbo Distortion and is suitable for punk, classic, alternative, and modern metal genres. The build quality is noted to be solid, although the body is made of plastic. Users have reported that it produces a good sound for its price and can be a budget-friendly option for distortion effects.

DD400 Digital Delay

The Behringer DD400 Digital Delay is designed to deliver 24-bit high- resolution stereo delay sounds comparable to state-of-the-art studio processors. It features 7 different modes and a delay time of up to 1.3 seconds. The pedal includes dedicated Mode, Time, Feedback, and Level controls for versatile sound manipulation. The output impedance is 1 kOhm for each output, and it can be powered with a 9 VDC, 100 mA power supply.

DR600 Digital Reverb

The Behringer DR600 Digital Reverb is a digital stereo reverb effects pedal designed to deliver 24-bit high-resolution stereo reverbs comparable to state- of-the-art studio processors. It offers six different reverb sounds: Spring, Plate, Hall, Gate, Room, and Modulate. The pedal features controls for LEVEL, TONE, TIME, and MODE, allowing users to shape their overall sound and determine the reverb time. The pedal also includes dual output jacks for stereo enhancement. The technical specifications of the DR600 are as follows: \- Inputs: Two 1/4" TS connectors (IN A and IN B) for stereo input signal, or mono input by using IN A only \- Outputs: Two 1/4" TS connectors (OUT A and OUT B) for sending the signal to the amplifier, with the option for full stereo effect or mono output using OUT A only \- Power Supply: 9V DC power supply or 9V battery \- Power Consumption: 30mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The DR600 does not have an on/off switch and begins running as soon as the jack is inserted into the IN connector. The pedal also features an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator.

HF300 Hi Band Flanger

The Behringer HF300 Hi Band Flanger is an effects pedal designed to deliver high-quality flanging effects one octave higher than usual for guitars and keyboards. Here are the technical specifications and features: Controls: 1\. MANUAL control: Adjusts the delay length and determines the starting point for the modulation range. 2\. DEPTH control: Adjusts the flanger sweep range according to the delay time. 3\. RATE control: Adjusts the speed of the flanger’s low-frequency oscillator. 4\. RES (resonance) control: Determines the amount of output signal fed back to the flanger input to increase the resonance effect. 5\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. Connectors: \- 1/4" TS IN connector: Plug in the instrument cable. \- 1/4" TS OUT connector: Sends the signal to the amp. \- DC IN connection: Plug in a 9V power supply (not included). \- Battery compartment: Located underneath the pedal cover for 9V battery installation. Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg Safety Instructions: \- Do not use near water or install near heat sources. \- Use only authorized attachments/accessories. \- Do not service the product yourself; contact qualified servicing personnel for repairs. Warranty: \- Register the equipment on the Behringer website and read the terms and conditions of the warranty carefully.

UT300 Ultra Tremolo

The Behringer UT300 Ultra Tremolo is a high-quality effects pedal designed to provide guitarists with easy-to-use tremolo effect styles, delivering classic, warm, and mind-bending tremolo effects of vintage '60s amps. The tremolo effect is achieved by periodic modulation of the input signal level, resulting in a continuous change from low to high level with a quivering, tremulous sound character. Key features and technical specifications include: \- Controls: RATE control for adjusting the speed of the tremolo effect, DEPTH control for adjusting the intensity of the effect, and WAVE control for altering the LFO waveform that modulates the input signal from triangle to square. \- LED Indicator: The ON/BATT LED illuminates when the effect is activated and serves as a battery level indicator. \- Footswitch: Use the footswitch to activate/deactivate the effect. \- Connectors: 1/4" TS IN connector for instrument cable input, 1/4" TS OUT connector for sending the signal to the amp, and DC IN connection for plugging in a 9V power supply (not included). \- Power Options: Can be powered by a 9V battery or a 9V DC power supply (sold separately). \- Physical Dimensions: Approximately 54 x 70 x 123 mm (H x W x D). \- Weight: Approximately 0.33 kg (0.73 lbs). Safety instructions and warranty details are also provided for user reference.

SO400 Super Octaver

The Behringer SO400 Super Octaver is an ultimate octaver effects pedal with polyphonic input capability, allowing for the creation of octaves one and two octaves below the original tone. It features the following controls: 1\. MODE switch: Selects operation modes - POLY (single octave sound), OCT 2 (heavy octave sound), and DRIVE (overdrive effect). 2\. DIRECT control: Adjusts the level of the original input signal and the DIR OUT connector. In DRIVE mode, it adjusts the total volume. 3\. OCT 1 control: Adjusts the level of the generated signal one octave below the original signal. 4\. Function knob: Its function depends on the position of the MODE switch, controlling the frequency range, volume of the second octave, or depth of the overdrive effect. 5\. Blue ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 6\. Footswitch: Activates/deactivates the effect. The pedal also includes various input and output connectors optimized for guitars and bass guitars, as well as a 9V power supply or battery option. The SO400 is designed to preserve the original tone while adding low tones through Real Sound Modeling (RSM) technology, and it comes with a 3-year warranty. For detailed technical specifications, the pedal's impedance, power supply requirements, physical dimensions, and warranty information can be found in the product documentation.

VD1 Vintage Distortion

The Behringer VD1 Vintage Distortion is an authentic, classic distortion effect pedal that exudes warm and emotive tones. It features dedicated Tone and Sustain controls, allowing for versatile and ultra-responsive distortion effects. The pedal produces harmonic grind similar to the natural distortion of a cranked-up tube amp. It is housed in a sturdy metal box and features physically hardwired true bypass for maintaining crystal-clear signal integrity. The VD1 can be powered with a 9V battery or the PSU-SB DC power supply (not included). With its simple Sustain, Tone, and Level dials, users can achieve a range of overdrive effects, from slightly dirty to hot and crunchy. The amber LED indicates when the pedal is activated.

CL9 Compressor/Limiter

The Behringer CL9 Compressor/Limiter is designed to achieve super-smooth compression and extended sustain. It features the following technical specifications: Controls: 1\. ATTACK TIME control: Determines the speed at which the compressor responds to input signal peaks. 2\. LEVEL control: Adjusts the output level. 3\. SUSTAIN control: Determines the amount of compression. 4\. ON/BATT LED: Illuminates when the effect is activated and serves as a battery level indicator. 5\. Footswitch: Used to activate/deactivate the effect. 6\. 1/4" TS IN connector: For instrument cable input. 7\. 1/4" TS OUT connector: Sends the signal to the amplifier. 8\. DC IN connection: For a 9V power supply (not included). 9\. Battery compartment: Located underneath the pedal cover. Specifications: \- Input Connector: 1/4" TS, Impedance 500 kΩ \- Output Connector: 1/4" TS, Impedance 1 kΩ \- Power Supply: 9V, 100 mA regulated \- Power Consumption: 30 mA \- Physical Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), weight approx. 0.73 lbs / 0.33 kg The CL9 is designed to compress loud signals and boost low signals without degrading the original sound. It does not have an on/off switch and is powered by a 9V battery or a 9V power supply. The specifications and appearance are subject to change without notice.

PH9 Phaser

The Behringer PH9 Phaser is designed to create phase-shifting effects with different characteristics ranging from modern to vintage. It features a RATE control to determine the speed of the phase-shifting effect, a SWIRL switch to change the phaser character from modern to vintage, and an LED that illuminates when the effect is activated and serves as a battery level indicator. The pedal is powered by a 9V battery or an optional external power supply. The unit has a 1/4" TS IN connector for instrument cable, a 1/4" TS OUT connector to send the signal to the amp, and a DC IN connection for a 9V power supply. The PH9 has no on/off switch and is activated when the jack is connected to the IN connector. The technical specifications include impedance, power supply details, physical dimensions, and weight.

VP1 Vintage Phaser

The Behringer VP1 Vintage Phaser is a high-quality effect pedal designed to provide authentic and classic three-dimensional phase shifting, ranging from rapid rotary speaker to impressive jet plane effects. The pedal features the following controls and connectors: 1\. RATE control: Determines the speed of the phase shifting effect. 2\. TONE switch: Allows selection between negative feedback (lower position) or positive feedback (upper position) phaser modes. 3\. STATUS LED: Illuminates when the effect is activated. 4\. Footswitch: Activates/deactivates the effect. 5\. ¼" TS INPUT connector: Used to plug in the instrument cable. 6\. ¼" TS OUTPUT connector: Sends the signal to the amplifier. 7\. DC IN connection: Used to plug in a 9V power supply (not included). 8\. BATTERY COMPARTMENT: Located on the bottom for installing or replacing the 9V battery. Technical Specifications: \- Input Impedance: 100 kΩ \- Output Impedance: 15 kΩ \- Power Supply: 9V, 100 mA DC regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2.9 x 3.3 x 5.6" (H x W x D) \- Weight: Approximately 0.86 lbs / 0.39 kg The VP1 does not have an on/off switch and begins running as soon as the jack is inserted into the in connector. When not in use, it is recommended to remove the jack from the in connector to extend the battery life.

UP300 Ultra Phase Shifter

The Behringer UP300 Ultra Phase Shifter is a 2-Mode Phaser Effects Pedal designed to provide a wide range of sonic possibilities. It features two distinctly different phase shifters built into one pedal, allowing access to various shades of sonic effects. The pedal is equipped with dedicated Level, Rate, Depth, and Resonance controls for sound shaping. Additionally, it includes a status LED for effect on/off and battery check, and it can be powered by a 9V battery or the BEHRINGER PSU-SB DC power supply. The pedal also features a high-quality electronic On/Off switch for signal integrity in bypass mode and is built with high-quality components for rugged construction and long life. The UP300 is covered by a 3-Year Warranty Program and is designed to compete with leading products on the market.

PB100 Preamp Booster

The Behringer PB100 Preamp Booster is a high-quality effects pedal designed to boost the volume and shape the sound of any instrument. It features adjustable Bass, Treble, and Gain controls, allowing users to adjust the low-frequency and high-frequency ranges of the signal, as well as the amount of preamplification. The pedal also includes an ON/BATT LED that serves as a battery level indicator and illuminates when the effect is activated. The footswitch is used to activate/deactivate the effect, and the pedal is equipped with 1/4" TS IN and OUT connectors for instrument cable and amp connection. The PB100 can be powered by a 9V power supply or a 9V battery. Technical Specifications: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9V DC, 100 mA regulated \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg

GDI21 Guitar Amp Modeler/DI

The Behringer GDI21 Guitar Amp Modeler/DI is a high-quality guitar modeling driver designed for hands-on musicians and no-frills types. It features different circuitries and components from famous amps packed into one housing, allowing users to alternate between various amp re-creations, gain settings, and mic placements with minimal effort. The GDI21 also functions as a standard ultra-transparent direct injection box when used in bypass mode. Key Control Elements: 1\. DRIVE control: Adjusts the overall amount of gain and overdrive. 2\. TREBLE control: Governs the high-frequency range of the signal (±12 dB). 3\. BASS control: Allows boosting/cutting of the low-frequency range (±12 dB). 4\. LEVEL control: Adjusts the output level of the GDI21. 5\. AMP switch: Selects one of three classic tube amps - TWE(E)D, BRIT(ISH), or CALIF(ORNIAN). 6\. MODE switch: Dials up one of three gain settings (HOT, HI G(AIN), CL(EA)N) to combine with the amp setting. 7\. MIC switch: Simulates microphone placement (CL(AS)SIC, C(E)NT(E)R, OFF (A)X(IS)) in relation to the cabinet. 8\. GND LIFT: Disconnects the ground connection between input and output to eliminate hum or ground loops. 9\. Footswitch: Activates/deactivates all tone functions (EQ, DRIVE, modeling). 10\. LED: Illuminates when the effect is activated. Connectors: 11\. ¼" TS INPUT connector: For instrument cable connection. 12\. BAL OUT: Balanced mic level output. 13\. ¼" TS OUT connector: Sends the signal to a guitar amp. 14\. SERIAL NUMBER: Located at the bottom. 15\. BATTERY COMPARTMENT: For installing or replacing the 9V battery. 16\. DC IN connection: For plugging in a 9V power supply (not included). Specifications: \- Input Impedance: 1 MΩ \- Output Impedance: 1 kΩ \- Balanced Output Impedance: 200 Ω \- Power Supply: 9V, >50 mA DC regulated \- Power Consumption: 25 mA \- Dimensions (H x W x D): Approx. 5 x 3 9/10 x 2" (127 x 100 x 50 mm) \- Weight: Approx. 1.01 lbs / 0.46 kg The GDI21 is suitable for stage, recording, rehearsal, or warm-up, offering an arsenal of different tones for all players.

RV600 Reverb Machine

The Behringer RV600 Reverb Machine is an ultimate reverb modeling effects pedal designed to deliver 24-bit, high-resolution stereo reverbs comparable to state-of-the-art studio processors. It features 11 well-known modes and extensive parameter control for maximum creativity. The pedal includes various controls such as TONE, MIX, DECAY, TIME, and TRAILS switch for smooth fading of the reverb when bypassed. The RV600 also offers 11 reverb type effects, including ECHO, TILE, CAVE, SPACE, DUCKNG, HALL, CHMBR, ROOM, PLATE, SPRING, and '63 SP. Additionally, it provides two 1/4" TS connectors for stereo input and output, and a footswitch for effect activation/deactivation. The technical specifications of the RV600 are as follows: \- Input Connectors: 1/4" TS (IN A and IN B) \- Output Connectors: 1/4" TS (OUT A and OUT B) \- Power Supply: 9 V, 100 mA regulated (BEHRINGER PSU-SB) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The RV600 is designed without an on/off switch and is powered by a 9 V battery or a 9 V power supply. It is important to note that the technical specifications and appearances are subject to change without notice.

DR600 Digital Reverb

The Behringer DR600 Digital Reverb is a digital stereo reverb effects pedal designed to deliver 24-bit high-resolution stereo reverbs comparable to state- of-the-art studio processors. It offers six different reverb sounds: Spring, Plate, Hall, Gate, Room, and Modulate. The pedal features controls for LEVEL, TONE, TIME, and MODE, allowing users to shape their overall sound and determine the reverb time. The pedal also includes dual output jacks for stereo enhancement. The technical specifications of the DR600 are as follows: \- Inputs: Two 1/4" TS connectors (IN A and IN B) for stereo input signal, or mono input by using IN A only \- Outputs: Two 1/4" TS connectors (OUT A and OUT B) for sending the signal to the amplifier, with the option for full stereo effect or mono output using OUT A only \- Power Supply: 9V DC power supply or 9V battery \- Power Consumption: 30mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The DR600 does not have an on/off switch and begins running as soon as the jack is inserted into the IN connector. The pedal also features an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator.

TP300 Ultra Tremolo/Pan

The Behringer TP300 Ultra Tremolo/Pan is a high-quality effects pedal designed to provide guitarists with easy-to-use tremolo and panning effect styles. It offers classic, warm, and mind-bending tremolo/panning effects reminiscent of vintage '60s amps. The pedal features dedicated Depth, Rate, and Mode controls for sound shaping, along with a MODE switch to select between 2 tremolo modes and 2 panning modes. The DEPTH control adjusts the amount of fluctuation, while the RATE control adjusts the speed of the fluctuation. The pedal also includes a status LED for effect on/off and battery check, and a footswitch to activate/deactivate the effect. Technical Specifications: \- In A Connector: 1/4" TS, Impedance 500 kΩ \- In B Connector: 1/4" TS, Impedance 500 kΩ \- Out A / Out B Connector: 1/4" TS, Impedance 1 kΩ \- Power Supply: 9 V type 6LR61 battery or BEHRINGER PSU-SB \- Power Consumption: 30 mA \- Mains Connection: 100 V - 230 V, 50/60 Hz \- Device Connection: 2 mm DC jack, negative center \- Dimensions: Approximately 54 mm (H) x 70 mm (W) x 123 mm (D) \- Weight: Approximately 0.33 kg (0.73 lbs)

UT300 Ultra Tremolo

The Behringer UT300 Ultra Tremolo is a high-quality effects pedal designed to provide guitarists with easy-to-use tremolo effect styles, delivering classic, warm, and mind-bending tremolo effects of vintage '60s amps. The tremolo effect is achieved by periodic modulation of the input signal level, resulting in a continuous change from low to high level with a quivering, tremulous sound character. Key features and technical specifications include: \- Controls: RATE control for adjusting the speed of the tremolo effect, DEPTH control for adjusting the intensity of the effect, and WAVE control for altering the LFO waveform that modulates the input signal from triangle to square. \- LED Indicator: The ON/BATT LED illuminates when the effect is activated and serves as a battery level indicator. \- Footswitch: Use the footswitch to activate/deactivate the effect. \- Connectors: 1/4" TS IN connector for instrument cable input, 1/4" TS OUT connector for sending the signal to the amp, and DC IN connection for plugging in a 9V power supply (not included). \- Power Options: Can be powered by a 9V battery or a 9V DC power supply (sold separately). \- Physical Dimensions: Approximately 54 x 70 x 123 mm (H x W x D). \- Weight: Approximately 0.33 kg (0.73 lbs). Safety instructions and warranty details are also provided for user reference.

VD400 Vintage Delay

The Behringer VD400 Vintage Delay pedal is designed to deliver authentic delay sounds comparable to state-of-the-art studio processors. It offers up to 300 ms of true analog delay and vintage slap-back echo. The pedal features the following controls: 1\. REPEAT RATE: Adjusts the delay time (repetition rate). 2\. ECHO: Adjusts the effect output level. 3\. INTENSITY: Adjusts the number of repetitions. Other features include a status LED for effect on/off and battery check, dedicated intensity, echo, and repeat rate controls for sound shaping, and a first-class electronic on/off switch for the highest signal integrity in bypass mode. The technical specifications of the VD400 Vintage Delay pedal are as follows: \- Input Connector: 1/4" TS \- Input Impedance: 500 kΩ \- Output Connector: 1/4" TS \- Output Impedance: 1 kΩ \- Power Supply: 9 V battery or BEHRINGER PSU-SB DC power supply (not included) \- Power Consumption: 30 mA \- Dimensions: Approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D) \- Weight: Approximately 0.73 lbs / 0.33 kg The pedal is designed and engineered in Germany and comes with a 3-Year Warranty Program.

UC200 Ultra Chorus

The Behringer UC200 Ultra Chorus pedal is designed to deliver a super-thick chorus with an unbelievable stereo effect. It offers full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal, creating a pleasant detune effect in connection with pitch variation. The pedal features the following controls: 1\. LEVEL: Adjusts the output level 2\. TONE: Allows adjustment of the overall effects sound to achieve a more defined and brilliant tone 3\. RATE: Determines the chorus effect speed 4\. DEPTH: Adjusts to achieve a fuller, deeper effect sound The UC200 also includes an ON/BATT LED that illuminates when the effect is activated and serves as a battery level indicator. The footswitch is used to activate/deactivate the effect. The pedal has one ¼" TS IN connector for the instrument cable and two ¼" TS connectors OUT A and OUT B to send the signal to the amp. For mono use, only the OUT A connector is needed, while both connectors are used for a full stereo chorus effect. The power supply for the UC200 is a 9V, 100 mA regulated Behringer PSU-SB. The pedal can also be powered by a 9V battery. The physical dimensions are approximately 2 1/8 x 2 3/4 x 4 4/5" (H x W x D), and it weighs approximately 0.73 lbs / 0.33 kg. The UC200 is designed to comply with FCC rules and has been tested to provide reasonable protection against harmful interference in a residential installation. It also complies with EU directives and regulations.

TU300 Chromatic Tuner

The Behringer TU300 Chromatic Tuner is a compact guitar and bass tuner that provides 7 different tuning modes. It offers 3 guitar modes (regular, flat, double flat), 3 bass modes (regular, flat, double flat), and a chromatic setting. The reference tone is adjustable from 438 Hz to 447 Hz, and it features a mute/bypass function for silent tuning. The tuner is equipped with a 7-segment LED display and 11-point LED indicators, providing accurate tuning. It can be powered by a 9V battery or a PSU-SB DC power supply. The TU300 also includes a main Out jack for cutting the signal to the amp while tuning, as well as a Bypass output for sending a constant signal. The status LED indicates when the tuner is activated, and it has a solid electronic on/off switch for maintaining signal integrity in bypass mode.

FM600 Filter Machine

The Behringer FM600 Filter Machine is an ultimate Filter Modeler that delivers a range of filter effects, including funky auto-wah, twin, band-pass, and swirling low-pass filter effects at the touch of a footswitch. The FM600 features various controls and connectors, including the FILTER switch for selecting filter types, SENS knob for sensitivity adjustment, PEAK knob for defining the shape of the filter, POL switch for determining filter frequency movement, RANGE knob for altering the travel range of the filter frequency, ON/BATT LED for effect activation status, footswitch for effect on/off, and 1/4" TS connectors for input and output. The unit can be powered by a 9V power supply or a 9V battery. The technical specifications include input and output impedance, power supply details for different regions, power consumption, physical dimensions, and weight. The FM600 complies with FCC rules and comes with safety instructions and warranty details.

DW400 Dynamic Wah

The Behringer DW400 Dynamic Wah is an ultimate Auto-Wah/Human Voice effects pedal designed to create classic wah effects and unbelievable human-voice "talking" sounds. It features Real Sound Modeling (RSM) technology that combines state-of-the-art DSP with sophisticated algorithms to emulate the human voice like nothing of its kind. The pedal offers three modes: Synth/Up/Down, Human Voice, and Tap Tempo Modes, allowing for versatile sound manipulation. Users can control the frequency sweeps by tapping a tempo with their foot or by setting the dials. Additionally, the DW400 can be powered with a 9V battery or a DC Power Supply (not included). The pedal also supports the use of an expression pedal for manual control of the sweep.

HD400 Micro Hum Destroyer

The Behringer MicroHD HD400 Ultra-Compact 2 Channel Hum Destroyer is designed to remove AC hum and noise quickly, easily, and reliably. It features two independent channels for eliminating hum in two mono signals or one stereo signal. The device breaks ground loops safely while maintaining the highest sound quality and can also convert unbalanced signals into balanced without any signal degradation. The HD400 is compact and portable, making it convenient for both recording and live performance applications. Technical Specifications: \- Type: DI/Hum eliminator \- Channels: 2 \- Inputs: 2 x TRS \- Outputs: 2 x TRS \- Height: 1.25" \- Width: 4.06" \- Depth: 2.25" \- Weight: 0.4 lbs \- Input Connector: 1/4" TRS, Balanced \- Input Impedance: Approx. 500k Ohms \- Output Connector: 1/4" TRS The HD400 is a reliable solution for eliminating AC hum and noise, ensuring clean and high-quality audio output.

DI600P Ultra-DI

The Behringer DI600P Ultra-DI is a high-performance passive DI (Direct Injection) box designed for stage and studio applications. Here are the technical specifications and features: \- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers \- Ultra-flat frequency response due to the renowned BEHRINGER OT-2 transformer \- Allows direct connection to speaker outputs with up to 3,000 Watts \- Ground Lift switch eliminates typical ground loop problems \- Filter switch reduces annoying hiss and buzz \- Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer \- ¼" TRS and gold-plated XLR connectors \- Ultra-rugged, road-suitable metal case \- High-quality components and exceptionally rugged construction ensure long life and durability \- Frequency response: 40 Hz (-3 dB) to 20 kHz \- THD+N (Distortion): 0.003% @ 1 kHz, input level +4 dBu \- Input: ¼" TS (unbalanced) \- Level change (input → output): -20 dB \- Output: Balanced XLR \- Impedance ratio (input → output): 110 : 1 \- INST/AMP switch: 30 dB pad \- Filter switch: Low pass @ 7.5 kHz (-3 dB) \- Dimensions (H x W x D): 1.4 x 3.75 x 5" / 35 x 95 x 128 mm \- Weight: approx. 0.66 lbs / 0.3 kg The DI600P is a versatile and reliable tool for connecting guitars, basses, keyboards, and other instruments directly to mixers, providing high-quality signal integrity and addressing common audio challenges.

Ultra-G GI100

The Behringer Ultra-G GI100 is a professional and multi-purpose direct injection box designed for stage and studio applications. It features an authentic 4 x 12" speaker emulation by renowned amp designer Jurgen Rath, providing impedance and signal matching for the direct connection of instruments to mixers and amplifiers. The Ultra-G GI100 offers an ultra-flat frequency response due to the renowned BEHRINGER OT-1 transformer and can be powered by either a 9V battery or phantom power from a console. Key Features and Specifications: \- Authentic 4 x 12" speaker emulation \- Impedance and signal matching for direct instrument connection \- Ultra-flat frequency response \- Internal battery automatically shuts off when phantom power is applied \- Allows direct connection to speaker outputs with up to 3,000 Watts \- Switchable input attenuation allows input levels of up to +50 dB \- Ground Lift switch eliminates typical ground loop problems \- ¼" TRS and gold-plated XLR connectors \- Ultra-rugged, road-suitable aluminum case with stackable oversized rubber corners \- Dimensions: 150 x 130 x 60 mm (6 x 5 x 2.4") \- Weight: approximately 650 g The Ultra-G GI100 is designed to provide a high level of performance and versatility for professional audio applications, offering a range of features to ensure optimal signal quality and compatibility with various equipment setups.

DI600P Ultra-DI

The Behringer DI600P Ultra-DI is a high-performance passive DI (Direct Injection) box designed for stage and studio applications. Here are the technical specifications and features: \- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers \- Ultra-flat frequency response due to the renowned BEHRINGER OT-2 transformer \- Allows direct connection to speaker outputs with up to 3,000 Watts \- Ground Lift switch eliminates typical ground loop problems \- Filter switch reduces annoying hiss and buzz \- Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer \- ¼" TRS and gold-plated XLR connectors \- Ultra-rugged, road-suitable metal case \- High-quality components and exceptionally rugged construction ensure long life and durability \- Frequency response: 40 Hz (-3 dB) to 20 kHz \- THD+N (Distortion): 0.003% @ 1 kHz, input level +4 dBu \- Input: ¼" TS (unbalanced) \- Level change (input → output): -20 dB \- Output: Balanced XLR \- Impedance ratio (input → output): 110 : 1 \- INST/AMP switch: 30 dB pad \- Filter switch: Low pass @ 7.5 kHz (-3 dB) \- Dimensions (H x W x D): 1.4 x 3.75 x 5" / 35 x 95 x 128 mm \- Weight: approx. 0.66 lbs / 0.3 kg The DI600P is a versatile and reliable tool for connecting guitars, basses, keyboards, and other instruments directly to mixers, providing high-quality signal integrity and addressing common audio challenges.

BLE100 Bass Limiter Enhancer

HD400 Micro Hum Destroyer

The Behringer MicroHD HD400 Ultra-Compact 2 Channel Hum Destroyer is designed to remove AC hum and noise quickly, easily, and reliably. It features two independent channels for eliminating hum in two mono signals or one stereo signal. The device breaks ground loops safely while maintaining the highest sound quality and can also convert unbalanced signals into balanced without any signal degradation. The HD400 is compact and portable, making it convenient for both recording and live performance applications. Technical Specifications: \- Type: DI/Hum eliminator \- Channels: 2 \- Inputs: 2 x TRS \- Outputs: 2 x TRS \- Height: 1.25" \- Width: 4.06" \- Depth: 2.25" \- Weight: 0.4 lbs \- Input Connector: 1/4" TRS, Balanced \- Input Impedance: Approx. 500k Ohms \- Output Connector: 1/4" TRS The HD400 is a reliable solution for eliminating AC hum and noise, ensuring clean and high-quality audio output.

DSP100P

The Behringer DSP100P is an ultra-high-performance digital multi-effects processor powered by a 24-bit high-speed digital signal processor (DSP). It features "Wave Adaptive Virtual Room" reverb algorithms calculated from precise mathematical room models to provide ultra-natural reverb effects. The device offers 32 breathtaking reverb, chorus, flanger, delay (up to 10 seconds), pitch shifter, vocoder, rotary speaker effects, and more, with over 700 effect variations. It includes two digital processing engines for independent or coupled effects on left and right channels, allowing true stereo processing performance for open-sounding enhancement of sound sources. The DSP100P is equipped with 20-bit A/D and D/A converters with 64/128 times oversampling for ultra-high headroom and resolution, as well as internal 24-bit processing with a professional 46 kHz sampling rate. It also features servo-balanced inputs and outputs on gold-plated XLR and TRS jack connectors for high signal integrity, 100 user preset memories for instant program recall, full MIDI capability for real-time parameter control and program selection, and an internal power supply design for professional application. The device is built with high-quality components and exceptionally rugged construction to ensure long life.

DI600P Ultra-DI

The Behringer DI600P Ultra-DI is a high-performance passive DI (Direct Injection) box designed for stage and studio applications. Here are the technical specifications and features: \- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers \- Ultra-flat frequency response due to the renowned BEHRINGER OT-2 transformer \- Allows direct connection to speaker outputs with up to 3,000 Watts \- Ground Lift switch eliminates typical ground loop problems \- Filter switch reduces annoying hiss and buzz \- Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer \- ¼" TRS and gold-plated XLR connectors \- Ultra-rugged, road-suitable metal case \- High-quality components and exceptionally rugged construction ensure long life and durability \- Frequency response: 40 Hz (-3 dB) to 20 kHz \- THD+N (Distortion): 0.003% @ 1 kHz, input level +4 dBu \- Input: ¼" TS (unbalanced) \- Level change (input → output): -20 dB \- Output: Balanced XLR \- Impedance ratio (input → output): 110 : 1 \- INST/AMP switch: 30 dB pad \- Filter switch: Low pass @ 7.5 kHz (-3 dB) \- Dimensions (H x W x D): 1.4 x 3.75 x 5" / 35 x 95 x 128 mm \- Weight: approx. 0.66 lbs / 0.3 kg The DI600P is a versatile and reliable tool for connecting guitars, basses, keyboards, and other instruments directly to mixers, providing high-quality signal integrity and addressing common audio challenges.

Ultra-G GI100

The Behringer Ultra-G GI100 is a professional and multi-purpose direct injection box designed for stage and studio applications. It features an authentic 4 x 12" speaker emulation by renowned amp designer Jurgen Rath, providing impedance and signal matching for the direct connection of instruments to mixers and amplifiers. The Ultra-G GI100 offers an ultra-flat frequency response due to the renowned BEHRINGER OT-1 transformer and can be powered by either a 9V battery or phantom power from a console. Key Features and Specifications: \- Authentic 4 x 12" speaker emulation \- Impedance and signal matching for direct instrument connection \- Ultra-flat frequency response \- Internal battery automatically shuts off when phantom power is applied \- Allows direct connection to speaker outputs with up to 3,000 Watts \- Switchable input attenuation allows input levels of up to +50 dB \- Ground Lift switch eliminates typical ground loop problems \- ¼" TRS and gold-plated XLR connectors \- Ultra-rugged, road-suitable aluminum case with stackable oversized rubber corners \- Dimensions: 150 x 130 x 60 mm (6 x 5 x 2.4") \- Weight: approximately 650 g The Ultra-G GI100 is designed to provide a high level of performance and versatility for professional audio applications, offering a range of features to ensure optimal signal quality and compatibility with various equipment setups.