Manufacturers
Guitar Pedals from Old Blood Noise Endeavors
Welcome to your ultimate guide to Old Blood Noise Endeavors's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by Old Blood Noise Endeavors. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Chorus and Vibrato
Visitor
The Old Blood Noise Endeavors Visitor is a dual modulation pedal designed to run two modulations in parallel, creating rare and inspiring combinations. The primary modulations include tremolo, chorus, and phaser, while the secondary modulations are tremolo and chorus. The pedal features controls for Rate and Depth for primary modulation, Secondary control for simultaneously adjusting depth, rate, and delay offset of secondary modulation, Regen for adding feedback from both modulations back into both modulations, and Mix for setting the overall wet/dry blend. Additionally, it includes an Expression jack for external control over the Secondary knob and a soft-touch bypass footswitch for true bypass and minimal switch noise. The Visitor requires a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included). It features artwork by Garrett Young and weighs 0.45 kg with dimensions of 14.4 × 8.2 × 7.8 cm. The pedal is powered by regular 9V PSU (9V DC, center -, 2.1 mm, ~46 mA current draw). The Visitor is designed to offer a modulation pedal that creates interweaving modulation effects, allowing for the creation of classic or surreal resonant chorus, tremolo, or phaser sounds. The parallel nature of the Visitor is introduced through its "Secondary" controls, which provide a range of parameters that create organic rising and falling textures, from dual tremolo chops to modulated reverberating slapbacks and rhythmic pulsating filter sweeps. For more detailed information, the Visitor manual is available on the Old Blood Noise Endeavors website.
Reflector Chorus V3
The Reflector Chorus V3 by Old Blood Noise Endeavors is a densely lush chorus pedal coupled with three modes of modulation. The pedal features controls for Rate and Depth for the chorus LFO, Mix for balancing between unaffected and affected signals, and Modulate for unique control in each mode, such as pitch shift, reverb blend, and filter depth. The three-way toggle switch allows the player to choose between three modes: Wrinkle, Washed, and Mirrors. The Reflector Chorus V3 also includes an expression out jack and clickless switching. The output level can be adjusted via an internal trimpot for boost, slight drop, or unity gain. The pedal requires a 9V DC center negative power supply with a draw of 110mA. Dimensions: \- Width: 2.5 inches \- Length: 4.5 inches \- Height: 2.28 inches \- Weight: 0.3 kg Power Specifications: \- Power Supply: 9V DC, center negative \- Current Draw: 60mA The Reflector Chorus V3 is designed for guitarists and musicians seeking a versatile chorus pedal with a range of modulation options to add depth and character to their sound.
Reflector v3
The Reflector V3 by Old Blood Noise Endeavors is an ultra-lush, modernized chorus pedal with versatile features. It offers straightforward controls for modulation rate and dry/wet mix, along with Depth and Modulate parameters with multiple functions. The pedal features three modes of modulation: Wrinkle, Washed, and Mirrors. In Wrinkle mode, the Depth control adjusts the chorusing amount, while the Modulate control acts as the master pitch control for a pitch-shifted chorus, sweeping between one octave down and one octave up as it moves clockwise. In Washed mode, which inserts a reverb effect pre-chorus, the Modulate control adjusts how much effect the chorus has on the clean and reverbed signal, and the Depth control adjusts the reverb amount. Mirrors mode adds a fixed filter for rich vibrato and active EQ sounds. The Reflector V3 also features a TRS expression pedal input, which can be assigned to either the Depth or Modulate parameter via an internal DIP switch, allowing the pedal to be used as a flavorful wah, an ultra-expressive reverb, and more. The pedal is powered by a 9V DC center negative power supply with a mA draw of 110. It also includes a soft-touch footswitch, relay bypass switching, and clickless switching. The output level can be tweaked via an internal trimpot for boost, slight drop, or unity gain. The Reflector V3 is designed for surf-rock guitarists and noise musicians seeking a chorus pedal that justifies its place on the pedalboard with its unique and expressive features.
Reflector
The Reflector by Old Blood Noise Endeavors is a densely lush chorus pedal with three modes of modulation. It features controls for Rate and Depth for the Chorus/Flanger/Vibrato speed, Mix for balancing between unaffected and affected signals, and Modulate for adding Pitch selection, Chorus Voice selection, or Flanger depth, depending on the mode. The pedal includes a three-way toggle switch for selecting between Wrinkle Mode (Vibrato-esque warble chorus with pitch selection), Myriad Mode (lush chorus with voice selection), or Mirrors Mode (Detuned Chorus meets Flanger). The Reflector also features an expression out jack and clickless switching, with the output level tweakable via an internal trimpot for boost, slight drop, or unity gain. It requires a 9V 2.1mm negative center-pin power adapter (not included) and has a 60 mA draw. The pedal is manufactured in the USA and includes true bypass. The UPC is 682500010989, and the EAN is 682500010989. The pedal's dimensions, weight, and additional technical details are not available.
Controllers and Switches
ABY pedal
The Old Blood Noise Endeavors AB/Y Switcher is a passive pedal designed for signal routing and splitting. It allows for independent connection of two sources (A and B) to a single output (Y), or simultaneous connection of both A and B to Y. The pedal features footswitches for A and B, as well as status LEDs for visual indication. The AB/Y can function passively without power, but the LED indication requires a 9V DC center negative 2.1mm jack power supply capable of 10mA (not included). Technical Specifications: \- Type: A/B/Y switcher \- LED Display: Yes \- Power Supply: 9V DC power supply unit (2.1 mm x 5.5 mm barrel connector, negative polarity (-) inside, not included) \- Dimensions: 68 x 112 x 45 mm \- Weight: 280 g \- Made in the USA \- Battery operation is not possible Use Cases: \- Switching between instruments at the start of a signal chain \- Routing and splitting signals for different outputs \- Suitable for guitarists and musicians requiring flexible signal routing options The AB/Y Switcher is a compact and versatile tool for managing signal flow and is suitable for a range of musical applications.
Expression Ramper
The Old Blood Noise Endeavors Expression Ramper is a versatile expression controller designed to automate expression control and create innovative sounds with pedals featuring an expression input. Here are the technical specifications and features: \- Shape Toggle: Allows the user to determine the LFO motion with options for triangle, square, or one-shot shapes. \- Assignable Knob: Enables setting of A position, B position, and LFO Rate. \- Footswitch: Activates expression output motion. \- Internal Configuration: Supports TRS, TRS reverse polarity, and TS configurations, with the ability to replace the built-in 50K digipot with 10K or 100K versions. \- LED Indicator: Displays the active setting. \- Power Requirement: Requires a 9V DC center negative 2.1mm jack power supply capable of 20mA (not included). The Expression Ramper allows users to pick two expression settings and move between them in one motion or as a continuous LFO activated by a footswitch. It offers three different ways to move between settings: linear Triangle wave sweep, instant Square Wave jumps, and a one-shot sweep. The speed of the LFO and one-shot movement is set via the Rate knob. The pedal is suitable for a wide range of effects pedals and can be configured for different polarity or types of expression pedal simulation using internal jumpers. Additionally, the internal 50K digital socketed potentiometer can be replaced with 10K or 100K values to tailor the pedal for specific expression- enabled devices. The compact enclosure ensures that the Expression Ramper can be easily integrated into any setup, offering a simple and intuitive way to unlock a wide range of sound possibilities. For more detailed information, the Expression Ramper manual is available on the manufacturer's website.
Delay
Black Fountain Delay
The Old Blood Noise Endeavors Black Fountain Delay V3 is a versatile delay pedal capturing the warm, modulated sound of vintage oil can delays with a modern feature set. It offers three distinct modes: Modern, Organ, and Vintage, each providing a different take on the voice of the delay. The pedal features tap tempo functionality, allowing users to set the tempo on the fly with two taps of a footswitch and subdivide that tempo into quarter, eighth, or triplet notes. Additionally, there is a hidden function where holding the Tap footswitch momentarily maximizes feedback, leading to a nearly sound-on- sound effect. The Black Fountain Delay V3 also includes an expression control feature, enabling the use of an expression pedal to control Time, Feedback, or both simultaneously. With expanded delay time ranging from around 30ms to almost 1 second, users have ample control over the delay elements. The Fluid, Mix, Time, and Feedback knobs further enhance the control over the delay effect blend from 100% dry to 100% wet. The pedal requires a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included) and features a soft-touch bypass footswitch for true bypass and minimal switch noise. The Black Fountain Delay V3 is handmade in the USA and weighs approximately 300g. The pedal's dimensions are 66 x 120 x 58 mm.
Dweller
The Dweller by Old Blood Noise Endeavors is a phase repeater pedal that offers a unique blend of phaser and delay effects. It is designed to create a wide range of sonic textures with its innovative features. Here are the technical specifications and details for the Dweller: \- Controls: \- Voice toggle to select between four-stage or eight-stage phase repeating \- Shape toggle to select between three wave shapes (sine, triangle, and random sample and hold) \- Rate and Depth to set the rate and depth of the LFO \- Regen to introduce feedback \- Stretch to change the delay time within each phase repeating stage \- Mix to set the effect blend from 100% dry to 100% wet \- Expression jack to externally control Stretch \- Soft-touch bypass footswitch for true bypass and minimal switch noise \- Modes: The Dweller offers six modes, allowing for familiar phase and vibe sounds, resonant random step filtering, warm delays, and previously unheard in-betweens. \- Expression Input: The pedal features an expression input that enables external control over the Stretch knob via an external expression pedal. \- Power Requirements: The Dweller is powered by a 9V DC center negative 2.1mm jack power supply capable of 110mA (power supply not included). \- Dimensions and Weight: The pedal has dimensions of 120 x 66 x 58 mm and weighs 301 grams. \- Made in the USA: The Dweller is manufactured in the United States. The Dweller's standout feature is the Stretch control, which introduces delay in between the phase stages, allowing for the creation of unique ambient textures. The pedal's voice and shape toggles, along with the expression input, provide users with extensive control over the phasing and delay effects, enabling the creation of classic phasing, random step filter sequences, thick vibey sounds, and organic vibratos. The Dweller's ability to produce a wide range of sonic textures and its innovative design make it a versatile tool for musicians and sound enthusiasts seeking to explore new creative possibilities in their music. For more detailed information, the Dweller manual is available on the manufacturer's website.
Dweller Phase Repeater
The Dweller Phase Repeater by Old Blood Noise Endeavors is a unique blend of phaser and delay effects, offering a wide range of sonic textures. Its features and technical specifications include: \- Voice toggle to select between four-stage or eight-stage phase repeating \- Shape toggle to select between three wave shapes (sine, triangle, and random sample and hold) \- Rate and Depth controls to set the rate and depth of the LFO \- Regen control to introduce feedback \- Stretch control to change the delay time within each phase repeating stage \- Mix control to set effect blend from 100% dry to 100% wet \- Expression jack for external control of the Stretch parameter \- Soft-touch bypass footswitch for true bypass and minimal switch noise \- Powered by a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included) The Dweller Phase Repeater is capable of producing familiar phase and vibe sounds, resonant random step filtering, warm delays, and unique ambient textures. It offers six modes and allows for control over Time or Morph via an external expression pedal. The pedal's output level can be adjusted via an internal trim-pot for boost, slight drop, or unity gain. The dimensions of the Dweller Phase Repeater are approximately 12 x 6.6 x 5.8 cm, and it is designed and made in the USA. For more detailed information, the Dweller manual is available on the manufacturer's website.
Black Fountain
The Old Blood Noise Endeavors Black Fountain V3 is a delay pedal that captures the warm, modulated sound of vintage oil can delays while offering modern features. The pedal features the following controls: 1\. Time: Sets the delay time 2\. Feedback: Sets the number of repeats 3\. Fluid: Sets the modulation amount 4\. Mix: Sets the effect blend from 100% dry to 100% wet 5\. Toggle: Selects between Modern, Organ, and Vintage modes 6\. Tap Tempo footswitch: Sets the tempo, or can be held down to momentarily max out feedback 7\. Expression jack: Allows external control of Time, Feedback, or both The pedal also features a soft-touch bypass footswitch for true bypass and minimal switch noise. It requires a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included). The Black Fountain V3 offers three different delay modes – Modern, Organ, and Vintage – each providing a unique voice to the delay. The pedal is designed to emulate short-delay oil-can units like the Tel-Ray Deluxe Organ Tone and Fender Dimension IV, with a fixed delay time and the ability to produce chorus-like delay modulation.
Minim
The Old Blood Noise Endeavors Minim is a versatile effects pedal designed for creating ambient soundscapes. It combines reverb, delay, and reverse functionalities to offer a wide range of sonic possibilities. The pedal features the following technical specifications and design details: \- Reverb: The pedal includes a modulated reverb with controls for mix, modulation, and decay, allowing users to create anything from simple room reflections to deep and endlessly trailing ambient washes. \- Delay: The delay section offers controls for volume, delay time, and feedback, providing users with the ability to shape the length of the delay (up to 400ms) as well as the modulation amount. \- Reverse: The reverse section can be activated with a footswitch for momentary or latching operation. Users can choose between smooth reverse effects or choppy glitchy textures, as well as change the reverse speed from normal to double time for unique stutter octave tones. \- Order Toggle: The pedal features an order toggle to set the location of the reverse effect in the signal chain, allowing for different ambient textures and sonic manipulations. \- Expression Jack: An expression jack is included for external control of the reverse mix, providing hands-free manipulation of the reverse effect. \- Power Requirements: The Minim pedal requires a 9V DC center negative 2.1mm jack power supply capable of 170mA (not included). \- Dimensions: The pedal has dimensions of approximately 14.3 × 10.9 × 8.5 cm and weighs approximately 0.49 kg. The Minim pedal is designed to offer musicians and sound artists a creative tool for shaping and bending time to create organically evolving sonic atmospheres, making it suitable for ambient, experimental, and creative music applications.
Excess
The Excess by Old Blood Noise Endeavors is a versatile pedal that combines distortion, delay, and chorus effects. It features individual level controls for both the distortion and modulation sides of the pedal. Additionally, it includes a second footswitch that allows users to choose between the chorus and delay modulations on the fly. The pedal also offers a series/parallel switch for routing the signal path. In series mode, the distortion drives the modulation side, and the level controls stack for a more pushing tone. In parallel mode, the two halves are summed together for a clearer modulation sound and more subtle distortion. The controls on the Excess pedal include: \- Gain, Tone, and Dist Vol controls for distortion \- Time, Depth, and Mod Vol controls for modulation \- Toggle for modulation mode (Delay, Chorus, or Fifth) \- Toggle to set effect order (Distortion into Modulation, Modulation into Distortion, or both effects in parallel) \- Expression jack to externally control Rate, Depth, or both \- Soft-touch bypass footswitches for true bypass and minimal switch noise The Excess pedal requires a 9V DC center negative 2.1mm jack power supply capable of 125mA (not included). For more detailed information, the Excess manual is available on the manufacturer's website.
Rever
Distortion
Fault V2
The Fault V2 by Old Blood Noise Endeavors is an expanded overdrive and distortion pedal designed to provide ample tonal and gain shaping options in a single package. It features a dual gain overdrive pedal that can transition from a clean boost to all-out distortion. The pedal includes a three-band EQ with sliders for precise control over low, mid, and high frequencies, allowing users to sculpt their desired tone. The Gain 2 channel enables users to switch from light overdrive to heavy distortion on the fly, offering a high level of interactivity with the Gain 1 setting. Additionally, the pedal includes a Boost switch to set the range of Gain 1 from clean to mean, as well as a Crush switch to add an additional post-EQ clipping stage. The Fault V2 also incorporates relay bypass switching and is powered by a regular 9V DC power supply with a center-negative 2.1mm jack, drawing approximately 31mA of current. The pedal's dimensions are approximately 14.3 × 10.9 × 8.5 cm, with a weight of 0.46 kg. The art of the Fault V2 is by Evan M Cohen. Overall, the Fault V2 is suitable for a wide range of use-cases, from pushing an amp over the edge to providing a sensitive drive for a clean signal, as well as acting as an all-out distortion for chugging rhythms, singing leads, or noise experiments.
Fault V1
The Fault V1 by Old Blood Noise Endeavors is an overdrive/distortion pedal designed to provide a wide range of tonal options. Here are the technical specifications and features: \- Controls: The pedal features Volume, Gain 1, and Voice controls to set the sound of the primary overdrive. It also includes a Boost toggle to set the range and voice of Gain 1, Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed, and a three-band EQ with Low, Mid, and High controls to adjust the post-drive voice of the pedal. Additionally, it has a Crush toggle to add additional clipping at the final stage in the circuit. \- Bypass: The Fault V1 is equipped with a soft-touch bypass footswitch for true bypass and minimal switch noise. \- Power Requirements: It requires a 9V DC center negative 2.1mm jack power supply capable of 60mA, which is not included with the pedal. \- Artwork: The artwork of the Fault V1 is by Evan M Cohen. The Fault V1 is suitable for a variety of use-cases, from providing a sensitive drive for a clean signal to acting as an all-out distortion for chugging rhythms, singing leads, or noise experiments. It offers ample control over voicing and can be the only gain pedal on a user's board, although it also stacks well with other pedals.
Excess
The Excess by Old Blood Noise Endeavors is a versatile pedal that combines distortion, delay, and chorus effects. It features individual level controls for both the distortion and modulation sides of the pedal. Additionally, it includes a second footswitch that allows users to choose between the chorus and delay modulations on the fly. The pedal also offers a series/parallel switch for routing the signal path. In series mode, the distortion drives the modulation side, and the level controls stack for a more pushing tone. In parallel mode, the two halves are summed together for a clearer modulation sound and more subtle distortion. The controls on the Excess pedal include: \- Gain, Tone, and Dist Vol controls for distortion \- Time, Depth, and Mod Vol controls for modulation \- Toggle for modulation mode (Delay, Chorus, or Fifth) \- Toggle to set effect order (Distortion into Modulation, Modulation into Distortion, or both effects in parallel) \- Expression jack to externally control Rate, Depth, or both \- Soft-touch bypass footswitches for true bypass and minimal switch noise The Excess pedal requires a 9V DC center negative 2.1mm jack power supply capable of 125mA (not included). For more detailed information, the Excess manual is available on the manufacturer's website.
Fuzz
Haunt
The Haunt by Old Blood Noise Endeavors is a high-gain gated fuzz pedal designed to deliver a wide tonal palette, ranging from smoother almost overdriving sounds to squishy splutters. The pedal features a silicon architecture and offers various controls for shaping the fuzz character: 1\. Volume, Tone, and Fuzz controls to set the overall voice of the fuzz 2\. Gate control to adjust the compression of the fuzz, interactive with the Fuzz control 3\. Mix control to blend in clean tone and provide clarity 4\. Low and Range switches to further shape the fuzz character 5\. Soft-touch bypass footswitch for true bypass and minimal switch noise Additionally, the Haunt pedal includes a toggle switch for Mode, which allows switching between two combinations of silicon transistors, and a Bass toggle switch that adds an additional low-end boost to the affected signal. The pedal requires a 9V DC center negative 2.1mm jack power supply capable of 30mA (not included) and has a power draw of 20mA. The Haunt by Old Blood Noise Endeavors is suitable for use in a wide array of musical styles and genres, offering a versatile and highly tweakable fuzz effect for guitarists and musicians seeking unique and expressive fuzz tones.
Alpha Haunt
The Alpha Haunt by Old Blood Noise Endeavors is a highly versatile and feature-rich fuzz pedal designed for guitarists seeking a wide range of fuzz tones. The pedal offers extensive control and flexibility, allowing users to achieve both softer overdrive and aggressive fuzz sounds. The following technical specifications and features are available: \- Controls: \- Fuzz: Sets the gain of the fuzz \- Distortion toggle: Sets the fuzz range \- Gate: Sets the compression of the fuzz, also increasing the amount of fuzz as it's turned up \- Bias toggle: Further controls the fuzz's gating character \- Tone: Sets the main voice of the fuzz \- LPF toggle: Sets the range of tone \- Fuzz Vol: Sets the output volume of the fuzz \- Enhance: Sets the volume of an additional boost circuit to blend in full- frequency un-fuzzed sound alongside the fuzz \- Master: Sets the overall volume \- Low, Mid, and High: Sets the overall EQ \- Soft-touch bypass footswitch for true bypass and minimal switch noise \- Additional Features: \- Switchable fuzz range, bias, and tone control voices for further options \- 3-band active master EQ sliders for precise tonal control over lows, mids, and highs \- Clean blend via Enhance control to retain string clarity and low-end response \- Switchable Low-Pass Filter \- Requires 9V DC center negative 2.1mm jack power supply capable of 40mA (not included) \- Dimensions and Weight: \- Weight: 0.453 kg \- Dimensions: 14.4 × 8.2 × 7.8 cm The Alpha Haunt is designed to provide guitarists with a wide array of fuzz tones, from sustaining and gated to mid-scooped or boosted, bright, dark, warm, chimey, and more. Its interactive controls and extensive feature set make it a versatile tool for crafting unique and diverse fuzz sounds suitable for various musical styles and use-cases.
Octave/Pitch Shifters
Reflector Chorus V3
The Reflector Chorus V3 by Old Blood Noise Endeavors is a densely lush chorus pedal coupled with three modes of modulation. The pedal features controls for Rate and Depth for the chorus LFO, Mix for balancing between unaffected and affected signals, and Modulate for unique control in each mode, such as pitch shift, reverb blend, and filter depth. The three-way toggle switch allows the player to choose between three modes: Wrinkle, Washed, and Mirrors. The Reflector Chorus V3 also includes an expression out jack and clickless switching. The output level can be adjusted via an internal trimpot for boost, slight drop, or unity gain. The pedal requires a 9V DC center negative power supply with a draw of 110mA. Dimensions: \- Width: 2.5 inches \- Length: 4.5 inches \- Height: 2.28 inches \- Weight: 0.3 kg Power Specifications: \- Power Supply: 9V DC, center negative \- Current Draw: 60mA The Reflector Chorus V3 is designed for guitarists and musicians seeking a versatile chorus pedal with a range of modulation options to add depth and character to their sound.
Reflector v3
The Reflector V3 by Old Blood Noise Endeavors is an ultra-lush, modernized chorus pedal with versatile features. It offers straightforward controls for modulation rate and dry/wet mix, along with Depth and Modulate parameters with multiple functions. The pedal features three modes of modulation: Wrinkle, Washed, and Mirrors. In Wrinkle mode, the Depth control adjusts the chorusing amount, while the Modulate control acts as the master pitch control for a pitch-shifted chorus, sweeping between one octave down and one octave up as it moves clockwise. In Washed mode, which inserts a reverb effect pre-chorus, the Modulate control adjusts how much effect the chorus has on the clean and reverbed signal, and the Depth control adjusts the reverb amount. Mirrors mode adds a fixed filter for rich vibrato and active EQ sounds. The Reflector V3 also features a TRS expression pedal input, which can be assigned to either the Depth or Modulate parameter via an internal DIP switch, allowing the pedal to be used as a flavorful wah, an ultra-expressive reverb, and more. The pedal is powered by a 9V DC center negative power supply with a mA draw of 110. It also includes a soft-touch footswitch, relay bypass switching, and clickless switching. The output level can be tweaked via an internal trimpot for boost, slight drop, or unity gain. The Reflector V3 is designed for surf-rock guitarists and noise musicians seeking a chorus pedal that justifies its place on the pedalboard with its unique and expressive features.
Reflector
The Reflector by Old Blood Noise Endeavors is a densely lush chorus pedal with three modes of modulation. It features controls for Rate and Depth for the Chorus/Flanger/Vibrato speed, Mix for balancing between unaffected and affected signals, and Modulate for adding Pitch selection, Chorus Voice selection, or Flanger depth, depending on the mode. The pedal includes a three-way toggle switch for selecting between Wrinkle Mode (Vibrato-esque warble chorus with pitch selection), Myriad Mode (lush chorus with voice selection), or Mirrors Mode (Detuned Chorus meets Flanger). The Reflector also features an expression out jack and clickless switching, with the output level tweakable via an internal trimpot for boost, slight drop, or unity gain. It requires a 9V 2.1mm negative center-pin power adapter (not included) and has a 60 mA draw. The pedal is manufactured in the USA and includes true bypass. The UPC is 682500010989, and the EAN is 682500010989. The pedal's dimensions, weight, and additional technical details are not available.
Overdrive and Boost
Fault V2
The Fault V2 by Old Blood Noise Endeavors is an expanded overdrive and distortion pedal designed to provide ample tonal and gain shaping options in a single package. It features a dual gain overdrive pedal that can transition from a clean boost to all-out distortion. The pedal includes a three-band EQ with sliders for precise control over low, mid, and high frequencies, allowing users to sculpt their desired tone. The Gain 2 channel enables users to switch from light overdrive to heavy distortion on the fly, offering a high level of interactivity with the Gain 1 setting. Additionally, the pedal includes a Boost switch to set the range of Gain 1 from clean to mean, as well as a Crush switch to add an additional post-EQ clipping stage. The Fault V2 also incorporates relay bypass switching and is powered by a regular 9V DC power supply with a center-negative 2.1mm jack, drawing approximately 31mA of current. The pedal's dimensions are approximately 14.3 × 10.9 × 8.5 cm, with a weight of 0.46 kg. The art of the Fault V2 is by Evan M Cohen. Overall, the Fault V2 is suitable for a wide range of use-cases, from pushing an amp over the edge to providing a sensitive drive for a clean signal, as well as acting as an all-out distortion for chugging rhythms, singing leads, or noise experiments.
Fault V1
The Fault V1 by Old Blood Noise Endeavors is an overdrive/distortion pedal designed to provide a wide range of tonal options. Here are the technical specifications and features: \- Controls: The pedal features Volume, Gain 1, and Voice controls to set the sound of the primary overdrive. It also includes a Boost toggle to set the range and voice of Gain 1, Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed, and a three-band EQ with Low, Mid, and High controls to adjust the post-drive voice of the pedal. Additionally, it has a Crush toggle to add additional clipping at the final stage in the circuit. \- Bypass: The Fault V1 is equipped with a soft-touch bypass footswitch for true bypass and minimal switch noise. \- Power Requirements: It requires a 9V DC center negative 2.1mm jack power supply capable of 60mA, which is not included with the pedal. \- Artwork: The artwork of the Fault V1 is by Evan M Cohen. The Fault V1 is suitable for a variety of use-cases, from providing a sensitive drive for a clean signal to acting as an all-out distortion for chugging rhythms, singing leads, or noise experiments. It offers ample control over voicing and can be the only gain pedal on a user's board, although it also stacks well with other pedals.
Phasers
Visitor
The Old Blood Noise Endeavors Visitor is a dual modulation pedal designed to run two modulations in parallel, creating rare and inspiring combinations. The primary modulations include tremolo, chorus, and phaser, while the secondary modulations are tremolo and chorus. The pedal features controls for Rate and Depth for primary modulation, Secondary control for simultaneously adjusting depth, rate, and delay offset of secondary modulation, Regen for adding feedback from both modulations back into both modulations, and Mix for setting the overall wet/dry blend. Additionally, it includes an Expression jack for external control over the Secondary knob and a soft-touch bypass footswitch for true bypass and minimal switch noise. The Visitor requires a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included). It features artwork by Garrett Young and weighs 0.45 kg with dimensions of 14.4 × 8.2 × 7.8 cm. The pedal is powered by regular 9V PSU (9V DC, center -, 2.1 mm, ~46 mA current draw). The Visitor is designed to offer a modulation pedal that creates interweaving modulation effects, allowing for the creation of classic or surreal resonant chorus, tremolo, or phaser sounds. The parallel nature of the Visitor is introduced through its "Secondary" controls, which provide a range of parameters that create organic rising and falling textures, from dual tremolo chops to modulated reverberating slapbacks and rhythmic pulsating filter sweeps. For more detailed information, the Visitor manual is available on the Old Blood Noise Endeavors website.
Dweller
The Dweller by Old Blood Noise Endeavors is a phase repeater pedal that offers a unique blend of phaser and delay effects. It is designed to create a wide range of sonic textures with its innovative features. Here are the technical specifications and details for the Dweller: \- Controls: \- Voice toggle to select between four-stage or eight-stage phase repeating \- Shape toggle to select between three wave shapes (sine, triangle, and random sample and hold) \- Rate and Depth to set the rate and depth of the LFO \- Regen to introduce feedback \- Stretch to change the delay time within each phase repeating stage \- Mix to set the effect blend from 100% dry to 100% wet \- Expression jack to externally control Stretch \- Soft-touch bypass footswitch for true bypass and minimal switch noise \- Modes: The Dweller offers six modes, allowing for familiar phase and vibe sounds, resonant random step filtering, warm delays, and previously unheard in-betweens. \- Expression Input: The pedal features an expression input that enables external control over the Stretch knob via an external expression pedal. \- Power Requirements: The Dweller is powered by a 9V DC center negative 2.1mm jack power supply capable of 110mA (power supply not included). \- Dimensions and Weight: The pedal has dimensions of 120 x 66 x 58 mm and weighs 301 grams. \- Made in the USA: The Dweller is manufactured in the United States. The Dweller's standout feature is the Stretch control, which introduces delay in between the phase stages, allowing for the creation of unique ambient textures. The pedal's voice and shape toggles, along with the expression input, provide users with extensive control over the phasing and delay effects, enabling the creation of classic phasing, random step filter sequences, thick vibey sounds, and organic vibratos. The Dweller's ability to produce a wide range of sonic textures and its innovative design make it a versatile tool for musicians and sound enthusiasts seeking to explore new creative possibilities in their music. For more detailed information, the Dweller manual is available on the manufacturer's website.
Dweller Phase Repeater
The Dweller Phase Repeater by Old Blood Noise Endeavors is a unique blend of phaser and delay effects, offering a wide range of sonic textures. Its features and technical specifications include: \- Voice toggle to select between four-stage or eight-stage phase repeating \- Shape toggle to select between three wave shapes (sine, triangle, and random sample and hold) \- Rate and Depth controls to set the rate and depth of the LFO \- Regen control to introduce feedback \- Stretch control to change the delay time within each phase repeating stage \- Mix control to set effect blend from 100% dry to 100% wet \- Expression jack for external control of the Stretch parameter \- Soft-touch bypass footswitch for true bypass and minimal switch noise \- Powered by a 9V DC center negative 2.1mm jack power supply capable of 110mA (not included) The Dweller Phase Repeater is capable of producing familiar phase and vibe sounds, resonant random step filtering, warm delays, and unique ambient textures. It offers six modes and allows for control over Time or Morph via an external expression pedal. The pedal's output level can be adjusted via an internal trim-pot for boost, slight drop, or unity gain. The dimensions of the Dweller Phase Repeater are approximately 12 x 6.6 x 5.8 cm, and it is designed and made in the USA. For more detailed information, the Dweller manual is available on the manufacturer's website.
Reverb
Dark Star
The Dark Star by Old Blood Noise Endeavors is a versatile and innovative pedal designed to create unique celestial soundscapes. It is a lo-fi reverb pedal with three distinct modes: Pitch, Delay, and Crush. In Pitch mode, the pedal adds an octave up and down to the reverb signal. In Delay mode, it incorporates a delay line into the reverb, while Crush mode offers octave control and a bit crush effect. The pedal features two control knobs, CTRL 1 and CTRL 2, which provide extensive tweakability in each mode. Additionally, it includes a hold footswitch that allows users to sustain a note indefinitely while playing over it. The Dark Star also offers an expression input in its version 2, enabling external control over various parameters. The technical specifications of the Dark Star include a requirement for a 9VDC power supply with a current draw of 60mA. The pedal's dimensions are approximately 14.4 x 8.2 x 7.8 cm, and it weighs around 430g. The pedal is designed and manufactured in the USA. The Dark Star has garnered positive reviews from musicians and is known for its ability to produce infinite pads and evolving textures. It has been used by various artists across different genres, showcasing its versatility and appeal to a wide range of musicians.
Sunlight
The Sunlight by Old Blood Noise Endeavors is a dynamic reverb pedal designed to indefinitely hold trails until new notes are played. It features three unique modes that add to the core atmospheric reverb sound, emulating tape modulation, stacking delays to create comb filters, or using a resonant bandpass filter to create a bubbling sample and hold sound, all within a dynamically interactive reverb. Key Features: \- Input knob for dynamic sensitivity and Decay knob for reverb feedback to create enveloping infinite reverb \- Three-way switch to select between Tape, Comb, and Pass modes \- Rate and Depth controls specific to each mode's modulation \- Expression jack for assignable external control over Input, Decay, Rate, and Depth parameters \- Alt footswitch to quickly snap to a particular knob setting \- Soft-touch bypass footswitch for true bypass and minimal switch noise Specifications: \- Power Requirement: 9V DC center negative 2.1mm jack power supply capable of at least 80mA (power supply not included) \- Dimensions: H: 5.8 cm (including knobs), W: 6.6 cm, D: 12 cm \- Weight: 0.5 kg The Sunlight pedal offers a versatile range of reverb effects and is suitable for creating mesmerizing soundscapes.
Minim
The Old Blood Noise Endeavors Minim is a versatile effects pedal designed for creating ambient soundscapes. It combines reverb, delay, and reverse functionalities to offer a wide range of sonic possibilities. The pedal features the following technical specifications and design details: \- Reverb: The pedal includes a modulated reverb with controls for mix, modulation, and decay, allowing users to create anything from simple room reflections to deep and endlessly trailing ambient washes. \- Delay: The delay section offers controls for volume, delay time, and feedback, providing users with the ability to shape the length of the delay (up to 400ms) as well as the modulation amount. \- Reverse: The reverse section can be activated with a footswitch for momentary or latching operation. Users can choose between smooth reverse effects or choppy glitchy textures, as well as change the reverse speed from normal to double time for unique stutter octave tones. \- Order Toggle: The pedal features an order toggle to set the location of the reverse effect in the signal chain, allowing for different ambient textures and sonic manipulations. \- Expression Jack: An expression jack is included for external control of the reverse mix, providing hands-free manipulation of the reverse effect. \- Power Requirements: The Minim pedal requires a 9V DC center negative 2.1mm jack power supply capable of 170mA (not included). \- Dimensions: The pedal has dimensions of approximately 14.3 × 10.9 × 8.5 cm and weighs approximately 0.49 kg. The Minim pedal is designed to offer musicians and sound artists a creative tool for shaping and bending time to create organically evolving sonic atmospheres, making it suitable for ambient, experimental, and creative music applications.
Procession
The Procession by Old Blood Noise Endeavors is an atmospheric modulated reverb pedal designed to create unique textures by blending otherworldly echoes with tremolo, flanger, and moving filter effects. The pedal offers three modulation types: Tremolo, Filter, and Flanger, providing a wide range of modulated reverb effects. Key Features: \- Three-way mode switch to select between Flange, Filter, and Tremolo \- Speed and Depth controls to set the rate and intensity of modulation \- Reverb control to set trail length \- Mix control to set overall wet/dry mix \- Expression jack for external control of the Speed or Reverb knob (selectable via internal switch) \- Hold switch to momentarily max the Reverb knob for infinitely sustaining reverb pads \- Soft-touch bypass footswitch for true bypass and minimal switch noise Technical Specifications: \- Power Requirement: 9V DC center negative 2.1mm jack power supply capable of 110mA (not included) \- Weight: 0.453 kg \- Dimensions: 14.4 × 8.2 × 7.8 cm The Procession's simple controls allow for a wide range of reverb soundscapes, from simple reverb to complex sci-fi filtery echo effects. The pedal also features an expression input for external control over modulation rate or reverb decay, as well as a momentary Hold switch for sustaining reverb pads.
