Billy Sheehan Signature Drive

The EBS Billy Sheehan Signature Drive is a bass overdrive pedal with dual loops, offering a range of features and technical specifications:

- Pedal Type: Bass Overdrive with Dual Loops
- Analog/Digital: Analog
- Inputs: 1 x 1/4" (instrument)
- Outputs: 1 x 1/4"
- Other I/O: 1 x 1/4" TRS (clean loop, drive loop)
- Controls: Drive, Tone, Level, Clean
- Compressor Modes: High, Mid, Off
- Clean Loop and Drive Loop for inserting external effects
- Nominal Input Level: -8 dBv
- Input Impedance: 700 kohms
- Gain Range (Drive): 20 - 40 dB
- Tone Filter Range: 175 - 4500 Hz
- Output Impedance (Loops): 2 kohms
- Mix Level (Drive Channel): +3 dB max
- Mix Level (Clean Channel): +6 dB max
- Compressor Ratio: 5:1 (max)
- Threshold: -25 +6 dB
- Attack Time: < 10 ms
- Release Time: 100 ms typ
- Makeup gain: 0, +3, +6 dB
- Output Impedance: < 100 ohms
- Dimensions: 3.5" x 4.5" x 1.4" (90 x 115 x 35 mm)
- Weight: 480g (1.07 lb. )
- Power Requirements: 9 - 12 V DC Regulated, 15 mA max*

Additionally, the pedal features advanced options accessible by removing the bottom plate, allowing fine-tuning trimmers to adjust the threshold level of the compressor and the level of compression when the mode switch is set to MID (COMP).

The EBS Billy Sheehan Signature Drive offers bass players the ability to blend a clean signal with distortion, preserve low frequencies, and achieve a balance between distortion and definition.