Manufacturers
Guitar Pedals from Shin-ei
Welcome to your ultimate guide to Shin-ei's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by Shin-ei. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Chorus and Vibrato
Vibe-Bro
The Vibe-Bro by Shin-ei is a meticulously crafted chorus-vibrato pedal designed to replicate the iconic Uni-Vibe tones. It features a compact design, measuring 8 1/2" x 5 1/2" x 2 1/2", making it pedal board friendly and taking up about 20% less space than the original Uni-Vibe. The pedal is built using many NOS (New Old Stock) electronic components and original Shin-ei "old school" flavoring, ensuring a vintage sound reminiscent of the original '60s Uni-Vibe. The Vibe-Bro employs a 6-pin DIN connector for its rate-controlling foot pedal, in contrast to a modern 1/4" jack, and it features a true bypass switching system. Additionally, it offers the option to choose between "TRUE BYPASS" or the original vintage vibe circuit "PREAMP" mode via the "Signal Path" slider switch on the back of the unit. The pedal is hand-built, and great care is taken to voice each individual unit as close to the originals as possible. It is designed to provide a truly great tonal and playable experience, and the creators aim for users to be able to stand the Vibe-Bro side by side with an original 60's vintage Uni-Vibe and hear no noticeable differences. The Vibe-Bro is available in international models with 220 volt and 240 volt configurations, as well as a special 100 volt model for the Japanese market.
Uni-Vibe
The Uni-Vibe by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24 volt DC wall power adapter. The pedal features NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus- Vibrato switch and original vintage style Uni-Vibe circuitry featuring many NOS components. It also includes two variable speed control knobs and a face- mounted Bypass-Preamp toggle switch. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non- cancelling). It is important to note that improper use of commercially available power supplies exceeding 24 volts DC will damage the Vibe-2 and void the warranty. The use of a speed control foot pedal with the Vibe-2 other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 can run on "one" 24 volt output (no doubler cable necessary) as long as the minimum amperage is 400mA. The Uni-Vibe offers two modes of operation - Chorus and Vibrato. It is known for its unique circuitry featuring an incandescent bulb surrounded by four light-dependent resistors (LDRs) that generate a rhythmic throb characteristic of the Uni-Vibe sound. The pedal does not have an actual bypass function but includes a fuse holder at the front.
Vibe-2
The Vibe-2 by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24-volt DC wall power adapter. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non-canceling). Key features include: \- NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus-Vibrato switch \- Original vintage style Uni-Vibe circuitry featuring many NOS components \- Two variable speed control knobs \- Face-mounted Bypass-Preamp toggle switch It is important to note that the Vibe-2 requires a minimum amperage of 400mA when using a 24-volt output. The use of third-party power supplies exceeding 24 volts DC will damage the unit and void the warranty. Additionally, the use of a speed control foot pedal other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 comes in several colors including standard Machine Gun Gray and Vintage Black, as well as custom colors such as Hot Rod Purple, Voodoo Red, and Mean Toxic Green.
Controllers and Switches
Siren Wah-Wah
Uni-Vibe
The Uni-Vibe by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24 volt DC wall power adapter. The pedal features NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus- Vibrato switch and original vintage style Uni-Vibe circuitry featuring many NOS components. It also includes two variable speed control knobs and a face- mounted Bypass-Preamp toggle switch. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non- cancelling). It is important to note that improper use of commercially available power supplies exceeding 24 volts DC will damage the Vibe-2 and void the warranty. The use of a speed control foot pedal with the Vibe-2 other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 can run on "one" 24 volt output (no doubler cable necessary) as long as the minimum amperage is 400mA. The Uni-Vibe offers two modes of operation - Chorus and Vibrato. It is known for its unique circuitry featuring an incandescent bulb surrounded by four light-dependent resistors (LDRs) that generate a rhythmic throb characteristic of the Uni-Vibe sound. The pedal does not have an actual bypass function but includes a fuse holder at the front.
Vibe-2
The Vibe-2 by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24-volt DC wall power adapter. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non-canceling). Key features include: \- NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus-Vibrato switch \- Original vintage style Uni-Vibe circuitry featuring many NOS components \- Two variable speed control knobs \- Face-mounted Bypass-Preamp toggle switch It is important to note that the Vibe-2 requires a minimum amperage of 400mA when using a 24-volt output. The use of third-party power supplies exceeding 24 volts DC will damage the unit and void the warranty. Additionally, the use of a speed control foot pedal other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 comes in several colors including standard Machine Gun Gray and Vintage Black, as well as custom colors such as Hot Rod Purple, Voodoo Red, and Mean Toxic Green.
Fuzz
Companion FY-6
The Companion FY-6 by Shin-ei is a reproduction of the original 1968 Shin-ei branded FY-6 Super Fuzz with modern enhancements. It features nine-volt external power capability and an LED pilot lamp for user convenience, along with a vintage-style nine-volt battery clip access. The unit is a tribute to the original 1967 Honey Co. Ltd. FY-6 "Baby Crying" effect, which was the first incarnation of the "Super Fuzz." The FY-6 Super Fuzz is designed with a stainless bottom featuring "Super Fuzz" printed on it, reminiscent of the original units made in 1968. It closely replicates the original electronic circuitry and is almost indistinguishable from an original unit. Each unit incorporates NOS carbon comp resistors and high-quality original design Matsushita/Panasonic transistors. In terms of operation, the unit is controlled by the Balance/Expander knobs and the slider switch (Tone 1 & 2) located on the left side of the unit. The design of the FY-6 Super Fuzz includes a steel enclosure with a recessed control area and a "Shin-ei" foil label, staying true to the original unit's aesthetics. The FY-6 Super Fuzz is known for its iconic sound, offering two very different shades of monstrous fuzz – ripping chainsaw fuzz or brutal octave-ish wildness. It has been used by numerous guitar icons and is a valuable addition to any fuzz arsenal.
FY-2 Companion
The Shin-ei FY-2 Companion is a vintage fuzz pedal that has been faithfully reproduced to capture the original magic of the 1960s model. It features the highest quality components, including carbon composition resistors and Japanese Matsushita transistors, ensuring an authentic vintage sound. The FY-2 Companion is designed with a simple interface, featuring Volume and Fuzz knobs located on the back of the unit for easy control. The bottom plate of the unit is equipped with two thumb screws, providing convenient access to the nine-volt battery. The pedal is constructed with solid steel and is available in different color options, such as Sea Foam Fuzz and Fiesta Fuzz. It operates on vintage-style 9-volt battery power and is designed with an EZ Release stainless steel bottom panel for easy battery replacement.
Phasers
Vibe-Bro
The Vibe-Bro by Shin-ei is a meticulously crafted chorus-vibrato pedal designed to replicate the iconic Uni-Vibe tones. It features a compact design, measuring 8 1/2" x 5 1/2" x 2 1/2", making it pedal board friendly and taking up about 20% less space than the original Uni-Vibe. The pedal is built using many NOS (New Old Stock) electronic components and original Shin-ei "old school" flavoring, ensuring a vintage sound reminiscent of the original '60s Uni-Vibe. The Vibe-Bro employs a 6-pin DIN connector for its rate-controlling foot pedal, in contrast to a modern 1/4" jack, and it features a true bypass switching system. Additionally, it offers the option to choose between "TRUE BYPASS" or the original vintage vibe circuit "PREAMP" mode via the "Signal Path" slider switch on the back of the unit. The pedal is hand-built, and great care is taken to voice each individual unit as close to the originals as possible. It is designed to provide a truly great tonal and playable experience, and the creators aim for users to be able to stand the Vibe-Bro side by side with an original 60's vintage Uni-Vibe and hear no noticeable differences. The Vibe-Bro is available in international models with 220 volt and 240 volt configurations, as well as a special 100 volt model for the Japanese market.
Uni-Vibe
The Uni-Vibe by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24 volt DC wall power adapter. The pedal features NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus- Vibrato switch and original vintage style Uni-Vibe circuitry featuring many NOS components. It also includes two variable speed control knobs and a face- mounted Bypass-Preamp toggle switch. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non- cancelling). It is important to note that improper use of commercially available power supplies exceeding 24 volts DC will damage the Vibe-2 and void the warranty. The use of a speed control foot pedal with the Vibe-2 other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 can run on "one" 24 volt output (no doubler cable necessary) as long as the minimum amperage is 400mA. The Uni-Vibe offers two modes of operation - Chorus and Vibrato. It is known for its unique circuitry featuring an incandescent bulb surrounded by four light-dependent resistors (LDRs) that generate a rhythmic throb characteristic of the Uni-Vibe sound. The pedal does not have an actual bypass function but includes a fuse holder at the front.
Vibe-2
The Vibe-2 by Shin-ei is a 1960's vintage style chorus-vibrato effect designed with the basic circuitry found in the original Uni-Vibe and Vibe-Bro. It runs on 24 volts DC and comes with its own 24-volt DC wall power adapter. The pedal board-friendly compact design measures 5.5 x 4.5 x 1.75 inches (13.5 x 11.5 x 4.5 cm) and accommodates an optional 1960's vintage style "Double Rubber" speed control pedal (non-canceling). Key features include: \- NOS Vintage Uni-Vibe style Japanese Miyama Black Chorus-Vibrato switch \- Original vintage style Uni-Vibe circuitry featuring many NOS components \- Two variable speed control knobs \- Face-mounted Bypass-Preamp toggle switch It is important to note that the Vibe-2 requires a minimum amperage of 400mA when using a 24-volt output. The use of third-party power supplies exceeding 24 volts DC will damage the unit and void the warranty. Additionally, the use of a speed control foot pedal other than an official Shin-ei Vibe-2 speed control pedal will also damage the unit and void the warranty. The Vibe-2 comes in several colors including standard Machine Gun Gray and Vintage Black, as well as custom colors such as Hot Rod Purple, Voodoo Red, and Mean Toxic Green.
