Split Personality

The Decibel Eleven Split Personality Amp Switcher offers the following features and technical specifications: \- Classic AB/Y format with an additional mute option \- Class-A, all discrete, high impedance buffer that eliminates losses due to splitting and allows driving long cable runs without high frequency loss \- Second output includes a phase reversal switch to correct any polarity mismatch between two amplifiers \- Increased headroom, allowing for hot signals without clipping \- Optional mute function for muting both outputs \- MIDI control, allowing remote access to 128 custom presets using MIDI program changes and/or direct switch control using MIDI continuous controller messages \- Power requirement: 9V - 12VDC input \- Dimensions: 4.8" x 3.75" x 1.58" \- Weight: 2lbs \- 5-year warranty The Split Personality is designed to deliver high performance by eliminating the buzz and hum caused by ground loops, and it is the only amp switcher pedal that is directly MIDI controllable, providing easy integration with any MIDI- controlled setup.

Pedal Palette

The Pedal Palette by Decibel Eleven is an analog loop bypass switcher, router, and mixer designed to facilitate the instant swapping of effect pedals while providing a parallel mix bus. Its features and technical specifications include: \- 4 Pedal Effects Loops with True Relay Bypass \- Ability to Swap Pedal Order Instantly \- Capability to Assign Any Effect Loop to Parallel Mix Bus \- Tails Control for Delay and Reverb, allowing tails to continue when switched off \- Fully Analog Signal Path with Optional Class A Discrete Input Buffer \- Ability to Store and Recall Up to 128 Pre-Set Configurations \- MIDI Sync for Recalling Stored Presets and Syncing Multiple Pedal Palettes \- Option to Easily Add Additional Loops with the Decibel Eleven Loop Expander \- 3-Year Warranty \- Dimensions: 13.2" x 5" x 1.6" \- Weight: 3 lbs The Pedal Palette offers highly flexible and programmable routing and order of effects, providing unlimited options to create new sounds from existing pedals.

Loop Expander

The Decibel Eleven Loop Expander is a true bypass audio switcher that adds programmable effects loop switching to any MIDI controlled setup. It is capable of managing up to four separate audio loops and includes the ability to substitute one of the loops as an amp switch. The Loop Expander also features optional 4th loop as an amp switch, switchable Class A discrete input buffer, and a compact size for mounting underneath pedalboards. Technical Specifications: \- 4 relay true bypass audio loops \- Optional 4th loop as an amp switch \- Switchable Class A discrete input buffer \- Compact size for mounting underneath pedalboards \- Dimensions: (W x D x H) 6.34" x 4.73" x 1.20" \- Weight: 1.3 lbs The Loop Expander is designed to provide versatile and seamless integration with MIDI controlled setups, offering users the flexibility to manage their audio loops and effects with precision and ease.

Switch DR

DB11 Loop Expander

The Decibel Eleven DB11 Loop Expander is a true bypass audio switcher that adds programmable effects loop switching to any MIDI controlled setup. It features 4 relay true bypass audio loops, with an optional 4th loop that can function as an amp switch. The expander also includes a switchable Class A discrete input buffer and is designed with a compact size for mounting underneath pedals or on a rack shelf. It works with MIDI Program Changes or MIDI Control Changes and comes with a 3-year warranty. The dimensions of the DB11 Loop Expander are 6.34" x 4.73" x 1.20" and it weighs 1.3 lbs.

Time After Time

The Decibel Eleven Time After Time is a full-featured analog delay pedal that combines vintage bucket brigade technology with modern features and control. It offers more than 1/2-second of delay time and features an all-analog signal path. The pedal also includes two-speed modulation with adjustable depth and operates on a 9V DC power requirement. Additionally, it is equipped with true bypass functionality.

Dirt Clod

The Decibel Eleven Dirt Clod is a fully analog overdrive distortion pedal featuring 10 memory presets. It provides a wide range of distortion sounds with two styles of clipping, in addition to variable mid and high controls. The pedal allows users to easily save presets and recall them as needed by accessing two different presets side by side, or by using the Dirt Clod bank mode to scroll and select preferred presets. Full MIDI capabilities enable the pedal to be used with a MIDI controller for automatically recalling presets or bypassing the pedal. MIDI expression pedal data can control any of the Dirt Clod parameters in real-time, allowing for adjustments to the distortion while playing and providing ultimate control. The pedal's dimensions are 4.5" x 5" x 2.4", and it weighs 1.5 lbs. The street price is $189.

Hot Stone Deluxe

The Hot Stone Deluxe by Decibel Eleven features 10 outlets with 5.5 x 2.1mm barrel connectors, all of which provide regulated and filtered DC voltage and are short circuit protected. The power supply includes the following output specifications: \- Outlets 1-2: 9V and 12V, 400mA \- Outlets 3-4: 9V and 12V, 400mA \- Outlets 5-6: 9V, 100mA each \- Outlets 7-8: 9V or 12V, 200mA each \- Outlets 9-10: 5V-9V (continuously variable), 100mA each The input features a detachable IEC line cord with 120V-230V selectable 50/60Hz. The power supply comes with various included cables, including 8 of the 5.5 x 2.1mm type, 2 of the 5.5 x 2.5mm type, and 1 of the 3.5mm mini plug type. The physical dimensions of the Hot Stone Deluxe are (W x D x H): 6.10″ x 3.46″ x 1.73″, with a weight of 2.65 lbs.

Hot Stone SMD

The Decibel Eleven Hot Stone SMD Isolated DC Power Supply is designed for smaller pedalboards and features 6 isolated and regulated outputs, including two high current outputs to meet the demands of digital guitar pedals. It includes selectable input voltage for added flexibility for touring musicians. The technical specifications are as follows: \- Input: Detachable IEC line cord, 120V-230V Selectable 50/60Hz \- Outputs: All outlets feature 5.5 x 2.1mm barrel connectors, center negative, regulated and filtered DC voltage, and short circuit protection \- Outlet 1-2: 9V and 12V, 400mA \- Outlet 3-4: 9V and 12V, 400mA \- Outlet 5-8: 9V, 100mA each \- Included Cables: \- (6) 5.5 x 2.1mm \- (1) 5.5 x 2.5mm \- (1) 3.5mm mini plug \- Physical Dimensions & Weight: \- (W x D x H): 5.83" x 3.46" x 1.73" \- Weight: 2.6 lbs