Manufacturers
Guitar Pedals from Analog Alien
Welcome to your ultimate guide to Analog Alien's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by Analog Alien. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Compression/Sustain
Alien Comp
The Alien Comp by Analog Alien features the same compressor circuit found in the Joe Walsh Double Classic pedal. Unlike most stomp box compressors, the Alien Comp has a natural and musical sound, similar to high-end rack-mounted compressors found in professional studios. The Ratio setting is adjustable from 2:1 to 10:1, allowing for moderate to heavy compression. Additionally, the Alien Comp can be used as a very effective clean boost, capable of boosting the amp from subtle to full overdrive with just a few turns of the control knobs. To use the Compressor as a clean boost, start by setting the Sensitivity control to about 3:00 o’clock and back the Ratio control off by setting it to the 10:00 o’clock position. Then, set the output control to achieve the desired amount of clean boost to the amp. The Alien Comp can be powered by using a 9v+ battery or an external power supply. The Alien Comp is priced at $199.00 and is available for both USA and international orders.
Joe Walsh Double Classic
The Joe Walsh Double Classic by Analog Alien is a signature multi-effects stompbox designed in collaboration with Joe Walsh, the legendary guitarist of the Eagles, Barnstorm, James Gang, The Party Boys, and Ringo Starr & His All- Starr Band. This dual effects pedal combines two essential circuits: Compressor and Classic Amp, which Joe uses in both live performances and studio recordings. The Compressor circuit allows control of the dynamic range of the instrument with features including Sensitivity, Ratio, and Output controls. The Sensitivity control adjusts the signal level at the input stage, the Ratio knob sets the compression ratio, and the Output knob controls the level of the output signal from the compressor to the next effect in the signal chain. The Classic Amp circuit is designed to simulate the classic tube amps that Joe has used over the years. It features controls for Bass, Treble, Gain, and Output, allowing users to adjust the low frequencies, mid and high range frequency spectrum, gain, and output level of the signal. The Pre/Post switch enables users to place the compressor before or after the Classic Amp in the signal chain, offering flexibility in signal processing. Technical Specifications: \- Manufacturer: Analog Alien \- Made In: USA \- FX: Compressor, Overdrive \- Type: Pedal \- Jacks mounted on: Top \- Bypass: True Bypass \- Battery: Yes \- Voltage: 9 \- Polarity: Center Negative \- Circuit: Analog \- Tube equipped: No \- Weight: 0.80 kg \- Famous Users: Joe Walsh \- Width: 14.6 cm \- Height: 3.8 cm \- Depth: 12 cm The Joe Walsh Double Classic offers studio-inspired vintage guitar tones at the stomp of a footswitch, providing a versatile and essential tool for guitarists aiming to achieve Joe Walsh's signature sound.
Distortion
Power Pack
The Analog Alien Power Pack is a versatile clean boost pedal designed to enhance your amp's input stage and maintain unity gain and tonal balance throughout your signal path. It is compatible with both guitar and bass and offers the following features and technical specifications: Features: \- Clean, transparent signal boost \- 100% analog circuitry \- Restores lost signal on involved pedal-boards \- Great for pushing an amp into overdrive \- Boosts your volume for pushing above the band Technical Specifications: \- Buffered input and unique gain stage \- Designed to work with both guitar and bass \- Maintains unity gain and tonal balance \- True-bypass switch for signal integrity when the pedal is switched off \- Gain control for adjusting the amount of boost \- Can be used to produce distortion and overdrive by boosting the guitar amplifier's input \- Suitable for use with smaller vintage tube amps to increase output \- Can restore unity gain to the signal path and improve the performance of other pedals in the signal chain The Power Pack is a versatile tool for musicians seeking a transparent and effective clean boost for their rigs.
Joe Walsh Double Classic
The Joe Walsh Double Classic by Analog Alien is a signature multi-effects stompbox designed in collaboration with Joe Walsh, the legendary guitarist of the Eagles, Barnstorm, James Gang, The Party Boys, and Ringo Starr & His All- Starr Band. This dual effects pedal combines two essential circuits: Compressor and Classic Amp, which Joe uses in both live performances and studio recordings. The Compressor circuit allows control of the dynamic range of the instrument with features including Sensitivity, Ratio, and Output controls. The Sensitivity control adjusts the signal level at the input stage, the Ratio knob sets the compression ratio, and the Output knob controls the level of the output signal from the compressor to the next effect in the signal chain. The Classic Amp circuit is designed to simulate the classic tube amps that Joe has used over the years. It features controls for Bass, Treble, Gain, and Output, allowing users to adjust the low frequencies, mid and high range frequency spectrum, gain, and output level of the signal. The Pre/Post switch enables users to place the compressor before or after the Classic Amp in the signal chain, offering flexibility in signal processing. Technical Specifications: \- Manufacturer: Analog Alien \- Made In: USA \- FX: Compressor, Overdrive \- Type: Pedal \- Jacks mounted on: Top \- Bypass: True Bypass \- Battery: Yes \- Voltage: 9 \- Polarity: Center Negative \- Circuit: Analog \- Tube equipped: No \- Weight: 0.80 kg \- Famous Users: Joe Walsh \- Width: 14.6 cm \- Height: 3.8 cm \- Depth: 12 cm The Joe Walsh Double Classic offers studio-inspired vintage guitar tones at the stomp of a footswitch, providing a versatile and essential tool for guitarists aiming to achieve Joe Walsh's signature sound.
Fuzz
Alien Twister
The Alien Twister by Analog Alien is a versatile fuzz, distortion, and overdrive pedal with a built-in buffer. It comes in a cloth satchel and is packed in its own branded wooden box, including a bottle of Analog Alien's Hot Sauce. The pedal features the following technical specifications and functionality: \- Input Control: Adjusts the level of the signal sent to the input of the Alien Twister, providing greater tonal possibilities when combined with the stab control. \- Output Control: Sets the amount of output signal sent to the amp, with a high output gain that reaches unity gain at 10 o'clock. \- Stab Control: Adjusts the voltage sent to the final transistor stage, allowing for a range of fuzz tones from splattering notes with less definition to a stronger sounding fuzz with lots of sustain and greater note definition. \- Buffer: The pedal includes a switchable IC buffer circuit, which can be used independently or in conjunction with the fuzz. It is designed to maintain signal strength through long cable runs and other pedals in the signal chain without loss of tone or signal level. Specifications: \- True Bypass \- 100% Analog Circuitry \- Buffer is IC-based and is before the fuzz circuit when engaged \- Plays well with other pedals \- Power: 9v+ battery or standard 9v+ power supply (1 SPOT NW1-US) recommended \- Current Draw: All Effects Off = 8.86ma, Both Sides On = 35.6ma, Fuzz Only = 22.4ma, Buff Only = 22.2ma \- Packaging: Custom Wooden Box, Imprinted Cloth Satchel, Bottle of Analog Alien Hot Sauce, Instruction Sheet, Analog Alien Sticker \- Warranty: One year under normal use to the original owner The Alien Twister is designed to offer a wide range of fuzz, distortion, and overdrive tones, making it suitable for various playing styles and guitar setups.
Fuzzbubble-45
The Analog Alien FuzzBubble-45 is a versatile overdrive and fuzz pedal designed to deliver vintage tube amp sounds from the 60s and 70s, as well as classic fuzz tones. The overdrive side is equipped with simple controls for output level, input level, gain, and a tone switch to adjust lower frequencies. It is touch-sensitive and responds to the player's style, offering a rich harmonic texture and clarity for each note. The fuzz side features controls for input, output, and haze to adjust the intensity of fuzz saturation, along with a tone switch for additional tone shaping flexibility. Both sides are designed to work together, offering a range of sonic possibilities. Each pedal comes with its own time capsule and a bottle of Alien bubbles. The FuzzBubble-45 is priced at $249.00.
Twister
The Twister by Analog Alien is a versatile fuzz, distortion, and overdrive pedal with a built-in buffer. It comes in a cloth satchel and is packed in its own branded wooden box. The pedal features an input control to adjust the level of the signal sent to the input, offering greater tonal possibilities when combined with the stab control. The output control sets the amount of output signal sent to the amp, reaching unity gain at 10 o'clock. The stab control adjusts the voltage sent to the final transistor stage, allowing for a range of fuzz, distortion, and overdrive effects. The pedal also includes a switchable IC buffer circuit, which can be used independently or in conjunction with the fuzz. Technical Specifications: \- True Bypass \- 100% Analog Circuitry \- Buffer is IC-based and is before the fuzz circuit when engaged \- Plays well with other pedals \- Power: 9v+ battery or standard 9v+ power supply (1 SPOT NW1-US recommended) \- Current Draw: \- All Effects Off = 8.86mA \- Both Sides On = 35.6mA \- Fuzz Only = 22.4mA \- Buffer Only = 22.2mA The pedal is designed to enhance a wide range of guitar tones and playing styles, offering a vintage vibe with modern power and tonal flexibility.
Multi-Effect Pedals
Rumble Seat
The Rumble Seat by Analog Alien is a multi-effects pedal designed for electric guitar, featuring overdrive, delay, and reverb circuits. It is designed to cater to rock, surf, and rockabilly styles, but its flexibility allows for use across various genres. The pedal can replace three individual pedals, saving space on a pedal board. Key Features: 1\. Overdrive Section: \- Simulates a vintage Marshall 69 Plexi amp. \- Controls: Output, Tone, Gain. \- Smooth overdrive with extra harmonic richness. 2\. Delay Section: \- Delay times range from 25ms to 650ms. \- Controls: Delay, Repeats, Mix. \- Vibrant delay from slapback to echoes. 3\. Reverb Section: \- Designed to sound like a vintage amp reverb. \- Simple and straightforward control. \- Classic-sounding reverb to finish off your tone. Additional Details: \- The overdrive control acts as a smooth tone enhancer and a switchable volume boost. \- The delay circuit is designed to maintain the guitar's signal integrity without weakening bass response. \- The reverb circuit is created to resemble the sweet spring reverb of a vintage tube amplifier. Controls: \- Output knob: Controls the direct output level when the Rumble Drive is engaged. \- Tone knob: Versatile and sensitive, allowing adjustment of treble or bass based on the guitar and its pickups. \- Gain knob: Controls the amount of gain sent to the circuit. \- Delay knob: Controls the time of the delay. \- Repeat knob: Controls the amount of repeats the effect will produce. \- Mix knob: Controls the amount of dry and wet signals. \- Reverb knob: Controls the level of reverb. The Rumble Seat offers a wide range of classic effects and is designed to provide rich, warm tones across its overdrive, delay, and reverb circuits.
EPI
The Analog Alien EPI (Effects Pedal Interface) is a high-end routing pedal designed to enable users to take the signal from their effects pedal and record it directly into a DAW or analog tape deck professionally, without any loss of signal or fidelity. The EPI automatically adjusts the impedance and voltage levels coming from effects pedals to interface properly with professional recording studio levels. It features dual effects send/return loops with separate foot-switches, balanced XLR, buffered 1/4", and RCA -10dBu outputs, and a guitar thru-output for connecting to an amplifier or guitar tuner. The EPI can be used to switch between two different pedal-boards, act as an A-B-Y box, a direct box, a re-amping device, or as a four-way splitter. It also has multiple uses such as a DI (Direct Box), re-amping tracks from a DAW, recording with effects pedals, bypassing an entire pedal-board, playing through up to four amps simultaneously, and switching between two different pedal-boards. The EPI has two separate insertion points (A&B;) that enable users to set up two separate signal chains and blend both signal paths independently from each other, and then combine them at the balanced XLR, buffered 1/4" or RCA -10dBu outputs. Additionally, the EPI can accept a direct signal from the output of a DAW or mixing console and can be used in live stage situations to hook up two separate pedal boards and have each board on independently or both on at the same time while simultaneously sending the effected signal to the house PA and the guitar amp.
EPI (Effects Pedal Interface)
The Analog Alien EPI (Effects Pedal Interface) is a high-end routing pedal designed to enable the use of guitar effects pedals with line-level devices such as drum machines, mixing consoles, 500 series processors, and recording interfaces. Its key features and technical specifications include: \- Dual effects send/return loops with separate foot-switches \- Automatically adjusts impedance and voltage levels for the highest possible fidelity \- Outputs include balanced XLR, buffered 1/4", and RCA -10dBu \- Balanced 1/4" input can accept instrument-level signal as well as line- level signals \- Guitar thru-output for connecting to an amplifier or guitar tuner \- Can be used to switch between two different pedal-boards or blend them \- Can also be used as an A-B-Y box, a direct box, a re-amping device, or as a four-way splitter The EPI offers versatile functionality, allowing users to use it as a DI (Direct Box), re-amp tracks from a DAW, record with effects pedals, bypass an entire pedal-board, play through up to four amps simultaneously, and switch between two different pedal-boards. It also features unique input circuitry and can be used in live stage situations for various applications. The EPI's design and functionality cater to musicians and recording professionals seeking to expand the creative possibilities of effects pedals in both studio and live settings.
Overdrive and Boost
Alien Twister
The Alien Twister by Analog Alien is a versatile fuzz, distortion, and overdrive pedal with a built-in buffer. It comes in a cloth satchel and is packed in its own branded wooden box, including a bottle of Analog Alien's Hot Sauce. The pedal features the following technical specifications and functionality: \- Input Control: Adjusts the level of the signal sent to the input of the Alien Twister, providing greater tonal possibilities when combined with the stab control. \- Output Control: Sets the amount of output signal sent to the amp, with a high output gain that reaches unity gain at 10 o'clock. \- Stab Control: Adjusts the voltage sent to the final transistor stage, allowing for a range of fuzz tones from splattering notes with less definition to a stronger sounding fuzz with lots of sustain and greater note definition. \- Buffer: The pedal includes a switchable IC buffer circuit, which can be used independently or in conjunction with the fuzz. It is designed to maintain signal strength through long cable runs and other pedals in the signal chain without loss of tone or signal level. Specifications: \- True Bypass \- 100% Analog Circuitry \- Buffer is IC-based and is before the fuzz circuit when engaged \- Plays well with other pedals \- Power: 9v+ battery or standard 9v+ power supply (1 SPOT NW1-US) recommended \- Current Draw: All Effects Off = 8.86ma, Both Sides On = 35.6ma, Fuzz Only = 22.4ma, Buff Only = 22.2ma \- Packaging: Custom Wooden Box, Imprinted Cloth Satchel, Bottle of Analog Alien Hot Sauce, Instruction Sheet, Analog Alien Sticker \- Warranty: One year under normal use to the original owner The Alien Twister is designed to offer a wide range of fuzz, distortion, and overdrive tones, making it suitable for various playing styles and guitar setups.
Bucket Seat
The Analog Alien Bucket Seat is equipped with the Rumble Drive circuit, offering a versatile range of overdrive tones from mild to high gain. Its smooth breakup and retention of guitar dynamics, even at high overdrive settings, ensure a rich and harmonically complex tone. The Gain control allows for adjustment from minimal gain to a very sweet overdrive with plenty of harmonics. The Rumble Drive simulates a vintage Marshall 69 Plexi amp, and the Output, Tone, and Gain knobs provide control over direct output level, treble/bass balance, and the amount of gain sent to the circuit, respectively. This pedal is designed to deliver a powerful tone stack, enabling users to dial in the perfect tone to match their setup, from low gain boost to overdrive edging on distortion.
Power Pack
The Analog Alien Power Pack is a versatile clean boost pedal designed to enhance your amp's input stage and maintain unity gain and tonal balance throughout your signal path. It is compatible with both guitar and bass and offers the following features and technical specifications: Features: \- Clean, transparent signal boost \- 100% analog circuitry \- Restores lost signal on involved pedal-boards \- Great for pushing an amp into overdrive \- Boosts your volume for pushing above the band Technical Specifications: \- Buffered input and unique gain stage \- Designed to work with both guitar and bass \- Maintains unity gain and tonal balance \- True-bypass switch for signal integrity when the pedal is switched off \- Gain control for adjusting the amount of boost \- Can be used to produce distortion and overdrive by boosting the guitar amplifier's input \- Suitable for use with smaller vintage tube amps to increase output \- Can restore unity gain to the signal path and improve the performance of other pedals in the signal chain The Power Pack is a versatile tool for musicians seeking a transparent and effective clean boost for their rigs.
Fuzzbubble-45
The Analog Alien FuzzBubble-45 is a versatile overdrive and fuzz pedal designed to deliver vintage tube amp sounds from the 60s and 70s, as well as classic fuzz tones. The overdrive side is equipped with simple controls for output level, input level, gain, and a tone switch to adjust lower frequencies. It is touch-sensitive and responds to the player's style, offering a rich harmonic texture and clarity for each note. The fuzz side features controls for input, output, and haze to adjust the intensity of fuzz saturation, along with a tone switch for additional tone shaping flexibility. Both sides are designed to work together, offering a range of sonic possibilities. Each pedal comes with its own time capsule and a bottle of Alien bubbles. The FuzzBubble-45 is priced at $249.00.
Rumble Seat
The Rumble Seat by Analog Alien is a multi-effects pedal designed for electric guitar, featuring overdrive, delay, and reverb circuits. It is designed to cater to rock, surf, and rockabilly styles, but its flexibility allows for use across various genres. The pedal can replace three individual pedals, saving space on a pedal board. Key Features: 1\. Overdrive Section: \- Simulates a vintage Marshall 69 Plexi amp. \- Controls: Output, Tone, Gain. \- Smooth overdrive with extra harmonic richness. 2\. Delay Section: \- Delay times range from 25ms to 650ms. \- Controls: Delay, Repeats, Mix. \- Vibrant delay from slapback to echoes. 3\. Reverb Section: \- Designed to sound like a vintage amp reverb. \- Simple and straightforward control. \- Classic-sounding reverb to finish off your tone. Additional Details: \- The overdrive control acts as a smooth tone enhancer and a switchable volume boost. \- The delay circuit is designed to maintain the guitar's signal integrity without weakening bass response. \- The reverb circuit is created to resemble the sweet spring reverb of a vintage tube amplifier. Controls: \- Output knob: Controls the direct output level when the Rumble Drive is engaged. \- Tone knob: Versatile and sensitive, allowing adjustment of treble or bass based on the guitar and its pickups. \- Gain knob: Controls the amount of gain sent to the circuit. \- Delay knob: Controls the time of the delay. \- Repeat knob: Controls the amount of repeats the effect will produce. \- Mix knob: Controls the amount of dry and wet signals. \- Reverb knob: Controls the level of reverb. The Rumble Seat offers a wide range of classic effects and is designed to provide rich, warm tones across its overdrive, delay, and reverb circuits.
Joe Walsh Double Classic
The Joe Walsh Double Classic by Analog Alien is a signature multi-effects stompbox designed in collaboration with Joe Walsh, the legendary guitarist of the Eagles, Barnstorm, James Gang, The Party Boys, and Ringo Starr & His All- Starr Band. This dual effects pedal combines two essential circuits: Compressor and Classic Amp, which Joe uses in both live performances and studio recordings. The Compressor circuit allows control of the dynamic range of the instrument with features including Sensitivity, Ratio, and Output controls. The Sensitivity control adjusts the signal level at the input stage, the Ratio knob sets the compression ratio, and the Output knob controls the level of the output signal from the compressor to the next effect in the signal chain. The Classic Amp circuit is designed to simulate the classic tube amps that Joe has used over the years. It features controls for Bass, Treble, Gain, and Output, allowing users to adjust the low frequencies, mid and high range frequency spectrum, gain, and output level of the signal. The Pre/Post switch enables users to place the compressor before or after the Classic Amp in the signal chain, offering flexibility in signal processing. Technical Specifications: \- Manufacturer: Analog Alien \- Made In: USA \- FX: Compressor, Overdrive \- Type: Pedal \- Jacks mounted on: Top \- Bypass: True Bypass \- Battery: Yes \- Voltage: 9 \- Polarity: Center Negative \- Circuit: Analog \- Tube equipped: No \- Weight: 0.80 kg \- Famous Users: Joe Walsh \- Width: 14.6 cm \- Height: 3.8 cm \- Depth: 12 cm The Joe Walsh Double Classic offers studio-inspired vintage guitar tones at the stomp of a footswitch, providing a versatile and essential tool for guitarists aiming to achieve Joe Walsh's signature sound.
Twister
The Twister by Analog Alien is a versatile fuzz, distortion, and overdrive pedal with a built-in buffer. It comes in a cloth satchel and is packed in its own branded wooden box. The pedal features an input control to adjust the level of the signal sent to the input, offering greater tonal possibilities when combined with the stab control. The output control sets the amount of output signal sent to the amp, reaching unity gain at 10 o'clock. The stab control adjusts the voltage sent to the final transistor stage, allowing for a range of fuzz, distortion, and overdrive effects. The pedal also includes a switchable IC buffer circuit, which can be used independently or in conjunction with the fuzz. Technical Specifications: \- True Bypass \- 100% Analog Circuitry \- Buffer is IC-based and is before the fuzz circuit when engaged \- Plays well with other pedals \- Power: 9v+ battery or standard 9v+ power supply (1 SPOT NW1-US recommended) \- Current Draw: \- All Effects Off = 8.86mA \- Both Sides On = 35.6mA \- Fuzz Only = 22.4mA \- Buffer Only = 22.2mA The pedal is designed to enhance a wide range of guitar tones and playing styles, offering a vintage vibe with modern power and tonal flexibility.